MP3 Player User Manual

ManualsBrandsWolverine ManualsMP3 Player8000

FlashPro

Memory Card Reader/Writer – MP3 Player/Recorder- FM Tuner

Mass Storage Device

8000 Series

User Manual

Version 1.0

Revision Date: September 23, 2005

How to update the firmware for my FlashPro 8000

• VISIT WOLVERINEDATA ON THE WEB

Go to http://www.Wolverinedata.com/ to download the latest firmware

• CONTACT WOLVERINEDATA

To help Wolverinedata promptly answer your questions, please have your

product’s model number, serial number , firmware version , and your contact

information when you call / send a mail to Customer Service

support@Wolverinedata.com

). The S/N and model numbers are on the back of

your FlashPro 8000 case.

Battery Installation Chart

Step 1: Remove the 4 screws on the front cover

CAUTION

Under no circumstances should you try to repair the system yourself,

as this will invalidate the warranty. Do not open the system as there

is a risk of electronic shock.

IMPORTANT WARRANTY INFORMATION

! To reduce the risk of fire or shock hazard, do not expose this

equipment to rain, any liquid or moisture.

! Wolverinedata shall have no obligation to repair, replace or refund

until the customer returns the defective product to Wolverinedata.

! Any replacement product may be either new or like –new,

provided that it has functionality at least equal to that of the

product being replaced.

! The repairs and replacement service will not apply to PRODUCT

units that were misused, repaired without authorization or by other

reasons beyond the range of intended use.

! Wolverinedata is not responsible for any data stored on returned

products, please backup any data prior to shipping the unit.

! The limited warranty for accessories (included battery) is only

valid for 6 months from the date of purchasing..

! All OUT OF WARRANTY repairs maybe subject to a normal repair

fee. Please contact your dealer or Wolverinedata for current

charges.

Package Checklist

! Main unit

! Earphone

! USB cable

! Carry Bag

! English user's guide

! Setup CD-ROM

! Power Adapter (100-240V auto switched )

Summary of content (8 pages)

PAGE 1
FlashPro Memory Card Reader/Writer – MP3 Player/Recorder- FM Tuner Mass Storage Device 8000 Series User Manual Version 1.0 Revision Date: September 23, 2005 28 How to update the firmware for my FlashPro 8000 • VISIT WOLVERINEDATA ON THE WEB Go to http://www.Wolverinedata.com/ to download the latest firmware CAUTION Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electronic shock.
PAGE 2
Step 2: To avoid bending the pins, carefully slide the battery into the chassis. FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. ©These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 3
Index 2.Troubleshooting. WARNING Under no circumstances should you try to repair the system yourself, as this will Invalidate the warranty. Do not open the system as there is a risk of electronic shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints ,consult Your dealer or service center. 1. Specifications ………………………………………..…6 2. Overview of Panels & keys…………………………... 7 3.
PAGE 4
1. Specifications: File Type Audio Equalizer Signal-to-Noise Ratio ID3 FM Recording Voice Recording Photo Storage FM Tuner Support Memory Card Interfaces Frequency Range General Hard Disk Size Display Interface AC Adaptor Battery Dimensions (Lx W x H) Weight System OS - MP3 (MPEG1 Audio Layer I/II/III & 2.5), Bit rate : 32kbps ~ 320 kbps CBR.
PAGE 5
FlashPro 8000 2. Press [ MENU ] button to open function menu . FlashPro 8000 3. Using the FlashPro 8000 3. Scroll to [REC INPUT ] 3-1 Starting up 4. Use [! ] or [ " ] button to set REC INPUT at [ MIC IN ] _________________________________________________________________ 1) Charge the batteries ! Before using for the first time, charge the batteries for a full four hours. 2) Power On /Off ! Press the power button. The green light will go on and the operating system will boot up.
PAGE 6
FlashPro 8000 FlashPro 8000 8. Recording: Macintosh MacOS 9.x - You can press the “Record” button anytime to start recording. However, 1 Insert your driver Installation into your CD-ROM drive and double click on "My computer" Browse your CD-ROM drive to "MacOS Installer". you are not able to record voice streams and listen to music at the same time. You are able to listen to FM radio and record radio show at the same time but unable to record voice.
PAGE 7
Using the equalizer 1. Switch on your FlashPro 8000. 2. Press [ MENU ] button to open function menu . 3. Scroll to 4. Use the [! ] or [" ] buttons to select EQ mode , the Equalizer setting included: JAZZ, ROCK, NORMAL, USER, POP, CLASSIC, USER – Define. Setting the repeat options 1. Switch on your FlashPro 8000. 2. Press [ MENU ] button to open function menu . 3. Scroll to 2. Scroll to [ FILE ] and press [ OK ] button. 2. Use the [ ! ] or [ " ] buttons to high-light a folder or a file you want to copy. 3.
PAGE 8
! If the “ OK” message display on the screen , it indicates the file is successfully copied ! If the “ OK” message display on the screen , it indicates the file is successfully deleted. ! The icon ☺ will display on the main page after switching your FlashPro 8000. If the “ NG” message display on the screen , it indicates the copy function is failed.