User manual

14
8. Clean Film Dust and Insert Proper Adapter into Slot
For best results, use included cleaning brush with felt side down to
wipe dust off the light table gently before inserting adapter.
Insert film Adapter with two
stick-out stoppers face down or
the embossed wording face up.
Gently push adapter from the
right side slot, right to left, until
stopped.
15
For 8mm/Super8 Insert gently push the Insert from front
to back until stopped.
U se fine soft cloth or canned air (not
included) to wipe or blow off any dust on
the film before feeding them into the
Adapter. Gently feed the film from the right
side of adapter.
In general, feed the film in right side up, and
shiny side up as follows:
Slides: printed logo or brand name facing
down.
8mm/Super 8: perforated holes on the right.
9. Prepare Film and Feed the Film into Adapter