F2D Titan Film to Digital Converter User Manual v1.0 Table of Contents Introduction ... 1 Before Using the Converter ... 1 Having Difficulty Using This Product ... 4 Package Contents ... 5 Ordering Accessories ... 5 Functions of Keys ... 6 Connect F2D Titan to TV Screen ... 7 Getting Started... 8 1. Attach Power ... 8 2. Use Built-in Memory ... 8 3. Use Optional SD/SDHC Memory Card ... 8 4. Format/Delete All Internal Memory or the SD/SDHC Card ... 9 5. Mode Selection ... 10 6. Set Film Type ... 11 7.
8. Clean Film Dust and Insert Proper Adapter into Slot ... 14 9. Prepare Film and Feed the Film into Adapter ... 15 10. Edit Image Orientation ... 17 11. Change Image EV (Exposure Value) and RGB Color ... 17 12. Convert Film to Digital File ... 19 13. Playback Converted Image Files ... 20 14. Connect F2D to Computer to Upload Image Files ... 22 15. Upload Image Files to PC and Delete the Uploaded Files ... 23 Specifications ... 24 One-Year Limited Warranty (United States Only) ...
. . . . . . . turn off the device immediately, continue using the device may result in fire or electric shock. Do not handle the device with wet hands. Doing so may cause electric shock and damages to the unit. Do not place the device close to any equipment that generates strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunction or data corruption. Do not expose the device to extreme temperatures, humidity or vibrations, which may cause damages to the device.
Having Difficulty Using This Product .. Please try the following options: Call us at 949-458-9888 M-F 9:00-5:00 Pacific Time We strongly recommend you to visit our web site, www.wolverinedata.com/support to watch videos including: 1. F2D Titan video manual 2. Easy way to open the F2D negative adapter 3. How to convert 8mm / Super 8 film and recreate the movie E-mail or write to our technical support staff at support@wolverinedata.com or our address: 9939 Muirlands Blvd. Irvine, CA 92618 .
Functions of Keys . Power: Power on/off. . Left/Mirror and Right/Flip: Highlight the selection to left/up or right/down; mirror or flip image in "Convert" mode. . Convert/Mode: Convert film to digital image in "Convert" mode. . Press Mode key one time to bring back the previous menu. Press Mode key twice any time to go back to Home Menu (start menu).
Getting Started 1. Attach Power Connect the included cable to the included power adapter. Plug the power adapter to a wall outlet, or plug cable to computer USB port directly. F2D Titan turns itself off after 30 minutes of idle time. 2. Use Built-in Memory F2D Titan has built-in memory that can store about 35 ~ 40 digital images. After power on, a "No card" icon will appear on the viewer for 3 seconds if no external memory card is inserted. 3.
5. Mode Selection F2D Titan has 7 modes and are listed below. Press Left or Right keys to change the mode then press OK/Enter key to execute the selection. You can always press Mode key to bring back the previous menu or press Mode key twice to go back to Home menu. Film Type - Selects type of film to convert, refer to Film Type Table on page 13 Delete All - Deletes all files in the internal memory or the inserted SD/SDHC card Convert - Converts film to digital image.
7. Select Film Adapter or/and Place Insert Use proper Adapter or/and Insert to convert your film, refer to Film Type/Film Adapter/Insert Table on page 13. Flip open the proper Adapter then place the Insert into the middle of window opening, align the 4 dimples underneath (see page 12). Snap close all 3 catches along the bottom edge tightly to avoid jamming when pushing adapter into the F2D Titan. Warning: Using wrong Film Adapter or/and Insert will result cropped or black areas on images.
8. Clean Film Dust and Insert Proper Adapter into Slot For best results, use included cleaning brush with felt side down to wipe dust off the light table gently before inserting adapter. Slide Adapter or Negative Adapter: Insert the Adapter with the embossed wording facing up. Gently push the adapter from the right side slot, right to left, until stopped. Number 8mm/Super8 Insert: Insert it with the embossed wording facing up. Gently push the Insert from front to back until stopped. APS: 1.
Negative: 1. Put Negative Adapter (#2) Insert into Titan. 2. Feed negative film and check the image from the viewer and adjust position accordingly. APS: 1. Place Slide Insert (#5) in Slide Adapter (#1). Negative/APS 2. Insert the Adapter into Titan. 3. Feed APS film and check the image from the viewer and adjust position accordingly. Note: You can go to YOUTUBE (www.youtube.com/watch?v=MniXz1VvoYc) to watch the video on how to get your negatives out of an APS cassette.
You can also adjust Red, Green, and Blue color components to enhance the image color of the film. Press Left or Right key to adjust the values, then press OK/Enter key to move on to the next color component. The edited value will remain unchanged until further adjustments were made. Note: Each brand or batch of film development process used different chemicals and have their own characters. You can make adjustments individually, or upload image files to a computer to do batch enhancements with a software.
13. Playback Converted Image Files 1. Press Left or Right key to highlight "Playback". 2. Press OK/Enter key to playback saved files on the viewer at 2 second intervals. Playback Mode Playback in Pause 3. Press OK/Enter key to pause slide show. Press Left/Right key to advance image forward or backward manually. 4. Press OK/Enter key one more time to go to Playback menu. 20 5. In the Playback menu, highlight Exit, then press OK/Enter key to resume Playback.
14. Connect F2D Titan to Computer to Upload Image Files For people who don't have a card reader on computer, you can use F2D Titan as an external card reader for your computer. 1. Plug small end of the USB cable to F2D Titan and the big end to USB port on the computer. 2. Insert SD/SDHC memory card if not using the internal memory. 3. Power on F2D Titan. 4. Press Left/Right key to highlight "USB UPLOAD". 5. Press OK/Enter key to activate the USB mode. USB UPLOAD USB UPLOAD 22 15.
Specifications Lens: F/3.48, f=5.12 LCD: 4.3" TFT LCD External memory: SD/SDHC card Exposure: Auto Color balance: Auto Resolution: 20 MP Data conversion: 24 bits per color channel Convert method: Single pass Light source: LED backlight Power: Powered from USB/5V adapter Interface: USB 2.0 Dimension: 115 x 99 x 169 mm Weight: 390 g Language: English and Japanese 24 Caution: This device complies with part 15 of the FCC Rules.
categories: software; external devices (except as specifically noted); accessories or parts added to a Wolverine Data system after the system is shipped from Wolverine Data or its resellers; accessories or parts that are not installed in the Wolverine Data factory. During the one-year period, beginning on the invoice date, Wolverine Data will repair or replace products returned to Wolverine Data's facility.
Altered Products Product or accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Wolverine Data parts or accessories, are excluded from coverage.
