User's Manual

To mount the AP to the WALL/BOX, do the following instruction:

1. Remove the attached DIN Rail Clip first.

2. This wall-mount plate can be shared with our switch or router. For WA512GM-D, please use the 6 screw

holes near the inside.

3. Lock the wall-mount plate by the attached “M3” 6mm length screw to the device.

4. Lock the wall-mount plate to the WALL. The suggested screw size for wall-mount is M6 12mm length. (This

screw varies from site to site, we do not attach it.)

Reference Wall-mount screw: M6 12mm