User's Manual

44
The Multi SSID section shows the configuration page where the Profile1 always enabled. In this section, user may
configure each Profile by check the box to enable the Profile and then click the profile name to open the
configuration page for specific Profile. The figure below is the pop-up WLAN Security configuration page for each
Profile. In this configuration page, user can configure the AP profile, divide the AP connection and set the security
setting by put the encryption mode and set the key or password to access the AP. Refers to the WLAN Security
Section for more description (3.7.3).
Click Submit to apply the configuration
Pop up window may be blocked by browser. Change browser settings to allow
pop-up window to configure multi-SSID.