User's Manual

57
3.4.3 WLAN Security
On this configuration page, user can configure the WLAN Security feature.
The description of the columns is as below:
TERMS
DESCRIPTION
Encryption
Configure the data encryption mode.
 None: Available only when the authentication type is an open system.
 64 bits WEP: It is made up of 10 hexadecimal numbers.
 128 bits WEP: It is made up of 26 hexadecimal numbers.
 TKIP: Temporal Key Integrity Protocol, which is a kind of dynamic
encryption, is co-used with WPA-PSK.
 AES: Advanced Encryption Standard, it is usually co-used with
WPA2-PSK.
Key Type
Default: Hex
WEP can be configured with a 64-bit or 128-bit Shared Key (hexadecimal or
ASCII). As defined, hexadecimal number is represented by 0-9, A-F or a-f;
ASCII is represented by 0-9, A-F, a-f or punctuation. Each one consists of
two-digit hexadecimal.
Default Key
Default: Key 1
Set the specific default key.
Key 1~4
Enter the specific encryption key.