BLUETOOTH SPEAKER DS-1130 1
Thank you to have chosen our product. This product has been created by our professional team and according to the USA regulation. For a better use of your new device, we recommend you to read carefully this user manual and keep it for record. Product sketch map 1. Pair/Pause/Play/Hand Free 2. Skip previous 3. Skip next 4. Volume down 5. Volume Up 1 2 3 4 5 6 7 8 9 10 6. Battery Indicator 7. Power On/Off 8.Mode button 9.Aux-in mode 10.Bluetooth Mode 11 11.DC Jack(5V) 12.
Set up 1. To press the to turn on the speaker. The turns blue. 2. Speaker starts searching for Bluetooth device, and blue LED starts flashing. to pair your 3. Turn on your Bluetooth device, search “DS-1130” and press Bluetooth device with the speaker. Password is “0000”. 4. Once paired, LED will change flashing rate from quick flashing to slow flashing. 5. Once paired successfully, both the speaker and your Bluetooth device will store the device.
Quick understanding for the mode and lights Status Indicator Bluetooth pairing Blue light flash quickly Paired Blue light flash slowly Aux-in mode Red Battery Indicator White light (each light indicates 25% of the battery) Power off No light Trouble shooting Symptom Possible problem and Solution Check whether the speaker is in standby and searching mode. Can not pair successfully Check whether there are too many Bluetooth receivers around your Bluetooth device.
Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
