BLUETOOTH® SPEAKER BAUHN SPK
Contents General Safety Instructions 3 Parts 4 Instructions 6 Specifications 9 Troubleshooting 10 Information INCLUDED IN CARTON: •• •• •• •• •• Bluetooth speaker Micro USB cable Aux cable Warranty card User guide The BLE Bluetooth® Speaker adopts a digital signal processing technique and is ideal for the office, home and similar environments. You can wirelessly connect your mobile phone, laptop/computer and more via the Bluetooth function to play high quality music.
General Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the completed warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to.
Instructions Charging Use the included USB cable to connect the speaker to your computer or USB power adaptor for charging. Set up 1. Move Power switch to ‘ON’ to turn on the speaker 2. The mode indicator turns on in blue and starts blinking while the speaker is searching for Bluetooth devices. 3. Turn on your Bluetooth device, select “BAUHN SPK” to pair and connect for the first time. If your Bluetooth device prompts you for a passcode, enter “0000” (four zeros).
Instructions Control buttons Press ‘VOL+‘ button to increase the speaker volume. Press ‘VOL-‘ button to decrease the speaker volume. Press ‘Play/Pause’ button on the speaker to play or pause the audio. Control buttons on your Bluetooth device can be used too. Hands-free function Press to answer incoming calls. Streaming audio pauses. Press to end calls. Streaming audio resumes.
Instructions Using Aux input 1. Connect your audio device and the speaker using a 3.5mm audio cable (Aux cable). 2. The speaker switches to Aux mode automatically. The mode indicator changes to solid red light. 3. Only ‘VOL-‘ and ‘VOL+’ buttons work for controlling the audio in Aux mode.
Specifications Bluetooth range Up to 10 metres Rated output 1.5W Operating frequency range 2.402GHz ~ 2.480GHz unlicensed ISM band Supported profiles Bluetooth v2.1, A2DP function Built-in litium battery Built-in rechargeable lithium ion battery 3.
Troubleshooting Symptom Bluetooth pairing cannot be accomplished. Possible problem and Solution • • Make sure your device’s Bluetooth function is turned on and the device is discoverable. If there are too many Bluetooth devices near the speaker, turn unused devices off to avoid interference. The sound is too soft. • Check the volume setting on both the speaker and your Bluetooth device and adjust the volume to a suitable level.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.