User's Manual

6
Instructions
Charging
Use the included USB cable to connect the speaker to your computer or USB power adaptor for charging.
Set up
1. Move Power switch to ‘ON’ to turn on the speaker
2. The mode indicator turns on in blue and starts blinking while the speaker is searching for Bluetooth
devices.
3. Turn on your Bluetooth device, select “BAUHN SPK” to pair and connect for the first time. If your Bluetooth device
prompts you for a passcode, enter “0000” (four zeros). If “BAUHN SPK” is not in the Bluetooth device list, scan
available Bluetooth devices.
4. When connecting is complete, the mode indicator’s blinking interval changes from short to long.
5. The speaker and your Bluetooth device store paired devices in memory. When the speaker is turned on,
the speaker attempts to connect to the last connected Bluetooth device. If the last connected device is not
available, the speaker attempts to connect to devices in memory one by one. The speaker stays in searching
if there is no available paired device.