DS-1181 manual Introduction: A1 A2 A3 A1: VolA2: Play/Pause A3: Vol+ B2 B2: Pair button
C1 C2 C3 C4 C1: Light button C2: USB port C3: Line In jack C4: Power switch Pairing a Bluetooth Device 1. Turn on the unit using the Power switch. The Pairing indicator will flash blue slowly. 2. Hold and press Pair button for 3s to go to pairing mode, the Pairing indicator will flash blue quickly. 3. Using the native controls on your Bluetooth device, select the “DS-1181” in your Bluetooth settings to pair. 3.
Using the 3.5mm Audio Input 1. Plug one end of a 3.5 mm audio input cable (included) into the 3.5 mm Audio Input on the unit. The Pairing/Line In Indicator will display a red light. 1. Plug the other end of the cable into the audio output/headphone output on an MP3 Player or other audio source. 2. Turn on the unit using the Power switch. 3. Audio played through the connected device will now be heard through the speakers.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
