User Manual

ManualsBrandsWoneNice ManualsBar Code ScannersBarcode Scanner Wireless 2-in-1 (2.4Ghz Wireless+USB 2.0 Wired) Handheld Bar Code Scanner Reader with USB Receiver for Store, Supermarket, Warehouse

2.4G_433M-V6.1

WoneNice 1D

Wireless barcode scanner

Manual Guide

*32-bit high-speed CPU *25 language settings

Summary of content (8 pages)

PAGE 1
2.4G_433M-V6.
PAGE 2
.4G_433M-V6.1 Specification TYPE Distance Memory 2.4G ≤100m 100000 barcodes 433M ≤400m 150000 barcodes Working current：3.
PAGE 3
2.4G_433M-V6.1 General Settings Scan barcode to setup scanner Restore defaults (restore factory settings) ■How to use the scanner ? 1, Press the button, the buzzer rang “Di-di-di” , the blue light is on, the scanner starts. 2, Plug the receiver to your computer, the blue light is on, the receiver starts to work. 3, Please match the receiver and the scanner within 30 seconds! 4, Open a text, put the cursor in, Scan any barcode to see if the barcode can be uploaded.
PAGE 4
2.4G_433M-V6.1 Working Mode ■Two upload mode：Instant upload mode、storage mode. ►Instant upload Mode：Instant upload data to your computer Instant upload Mode (1) Upload successfully: The blue light flashed and the buzzer rang “ Di ”. (2) Upload failed: The red light flashed and the buzzer rang “ Di---en”. ►Storage Mode ：Scan and store barcode inside the scanner, and uploaded the data to your computer when you need it.
PAGE 5
2.4G_433M-V6.1 Power and Standby Setup Battery Reserve（show battery level） Set the time for automatic shutdown 50 seconds shutdown 2 minutes shutdown-Default 5 minutes shutdown 30 minutes shutdown Battery level indication 1. The scanner starts, when the buzzer rang “Di-di-di” and the blue light is on with no red light flashing, it indicates that the battery is sufficient 2.
PAGE 6
2.4G_433M-V6.
PAGE 7
2.4G_433M-V6.1 Language UNITED STATES BELGIUM BRAZIL DENMARK FRANCE GERMANY HUNGARY ITALY LATIN AMERICA NETHERLANDS NORWAY PORTUGAL SPAIN SWEDEN UNITED KINGDOM UNIVERSAL Note：Support 25 languages .
PAGE 8
2.4G_433M-V6.1 Frequently ask question Question: Press the key, the red laser appear and then goes out, but there is no bar code display in the input box? Answer: 1. The USB receiver has not plugged into the computer USB port, please make sure that the USB receiver has been fully plugged into the USB port. 2. The USB port of the computer is out of condition, please plugged the USB receiver into the USB port of another computer to test 3.