User Manual

Aim the lens of WONGKUO Battery Camera at the QR
code displayed on the mobile phone APP, keep the lens
about 0.33ft away from the phone’s screen, and don’t take
it away until you hear the prompt tone of successful
scanning; wait until the Wi-Fi installation is completed and
select “OK” when you hear the tone of successful
matching. At the same time, all matches have been
completed. (During the QR code scanning process, please
note that the distance between the mobile phone and the
lens cannot be greater than 0.33ft, and there should be no
reflections from the QR code display on the phone screen.)
(7)
Registered successfully
Try it. After Setup is complete, click the middle screen of
the homepage in the Aiwit APP to see the live video.
(8)
1. Attach the bracket to WONGKUO Battery Camera.
Wall Mounting Method of the Camera
2. Tighten the bracket screw by turning it
clockwise with a screwdriver of the
corresponding size.
3. Mark the wall or ceiling with “drill a hole” and
drill a hole in the wall or ceiling with a drill. Insert
the anchor and fix the battery camera with the
anchor screw.anchor screw.
9 8