Assembly Instructions

Left Side
Right Side
Top Piece
(2) Rails
(26) Hex Screws
Allen Wrench
Step 2: Insert edge of Top Piece
into mortise of Right Side. Insert hex
screws into each of the pre-drilled
holes in Right Side. Tighten down
halfway.
Step 3: Insert edge of Center
Shelf into mortise of Left Divider.
Insert hex screws into each of the
pre-drilled holes in Left Divider
and tighten halfway.
Step 4: Insert edge of
Center Shelf into mortise
of Right Divider. Insert
hex screws into each of
the pre-drilled holes in
Right Divider. Tighten
down halfway.
Step 7: Tighten all screws snugly. DO NOT
OVERTIGHTEN. Rotate unit so that it rests
on Bottom Piece and edges of Side Pieces.
Assembly is now complete.
Parts:
Step 1: Insert edges of Top into
mortise on Rail. Insert hex screws
into pre-drilled holes in Rail. Tighten
down halfway. Repeat for remaining
Rail.
Bottom Piece
Right Divider
Mortise
on both
sides
Left Divider
Center Shelf
Small Shelf
Step 5: Insert edge of
Small Shelf into mor-
tise of Right Divider.
Insert hex screws into
each of the pre-drilled
holes in Right Divider.
Tighten down halfway.
Step 6: Insert edges of Right Divider and
Left Divider in dados of Bottom Piece.
Insert hex screws into each of the pre-
drilled holes in Bottom Piece. Tighten
down halfway.
Step 7: Insert edge of Bottom Piece
and Small Shelf into remaining mor-
tises of the Right Side. Insert edge of
each Divider and into the correspon-
ding mortise on Top Piece. Insert hex
screws into pre-drilled holes of Right
Side. Tighten down halfway.
Step 8: Insert edge of Top Piece,
Rails, and Bottom Piece into mortise
of Left Side. Insert hex screws into
each of the pre-drilled holes in Left
Side. Tighten down halfway.
Mortise
on one
side
Do Not Drill!
ASSEMBLY INSTRUCTIONS