Operator`s manual

f:\manuals\forms\624 HD92doc042701
WOOD-MIZER LT30HD/LT40HD MAINTENANCE LOG
PROCEDURE MANUAL
REFERENCE
TOTAL HOURS OF OPERATION
FILL IN THE DATE AND THE MACHINE HOURS AS YOU PERFORM EACH PROCEDURE.
A SHADED BOX INDICATES MAINTENANCE IS NOT NEEDED AT THIS TIME.
2050 HRS 2100 HRS 2150 HRS 2200 HRS 225O HRS 2300 HRS 2350 HRS 2400 HRS 2450 HRS 2500 HRS
Clean & lube mast rails See Section 3.7 Grease track rollers (If greasable rollers) See Section 3.6 Lubricate drum switches See Section 3.8 Grease pivot points and bearings/Oil chains See Section 3.9
See Section 3.15 See Section 3.16
Check belt tensions See Section 3.15
See Section 3.16
Check brake strap tension See Section 3.12 Rotate drive/idle blade wheel belts/Check all belts for wear
See Section 3.11
Check feed & up/down chain tensions See Section 3.15
See Section 3.16
Check up/down gear box fluid level See Section 3.15 Lubricate blade tensioner handle and rods See Section 3.10 Inspect hydraulic lines & fittings See Section 3.13 Check hydraulic fluid level See Section 3.13 Replace hydraulic system filter (Rev E7+) See Section 3.13 Service Hydraulic Drive Motor (Rev C7 - E6) See Section 3.13 Replace cylinder drive bearing fluid See Section 3.14 Grease up/down shaft bearing See Section 3.15