Operating instructions

Questions? Call Wood Stone at 800-988-8103
25
RFG-IR-W Oven Installation and Operation Manual
October 2007
Quick Troubleshooting Guide
Problem Solution
Controller will not turn on.
1.Incoming power to oven turned off. Check
circuit breaker for circuit supplying the oven.
Check that any wall switches external to the
oven that control oven power are turned on.
Check that any interlocks external to the oven
are turned on. and that exhaust fan is on.
2. If control still does not turn on, please
contact Wood Stone for assistance.
Radiant flame does not
light.
1. Is gas turned on to the oven? Is gas valve
turned all the way on?
2. Debris in burner. Burner may require
cleaning. Contact Wood Stone for assistance.
3. Damaged igniter or gas valve. Contact Wood
Stone for assistance.
If the oven is being started for the first time:
Has all air been bled from the gas line?
Are the switches on the SV-1 and SV-2 valves
beneath the oven in the ON position?
Underfloor burner is not
running.'Hearth Heat' light
is off.
Hearth temperature is
above the setpoint.
'Chec' display on
controller.
Underfloor burner did not fire when the
floor temperature dropped below the
setpoint.
Contact Wood Stone for assistance.
Please contact Wood Stone at 1-800-988-8103 should service be
necessary, or if you have any questions about your oven. Our office
hours are 8am to 4:30pm West Coast time. Follow the recorded
instructions for Emergency Service if you require assistance during
non-business hours. A Wood Stone technician will promptly respond
to your call.
TROUBLESHOOTING
Hearth temperature is above the setpoint.
This is normal. Radiant (dome) flame can
drive the temperaure over the setpoint. The
setpoint only controls the underfloor (hearth)
burner.Turn down the dome flame if needed.