Specifications

Mountain Series
Installation and Operation Manual
An ongoing program of product improvement may require us to change
specifications without notice. WS-MS-(4,5,6,7)-RFG-W,
Revised May 2015. Doc no: M0032.02
[e-mail] or visit woodstone-corp.com
wood stone corporation
1801 w. bakerview rd.
bellingham, wa 98226 usa
tf. 800.988.8103
t. 360.650.1111
f. 360.650.1166
36
MAINTENANCE
CLEANING THE OVEN
Clean as needed —multiple times per hour depending on production� Wood Stone recommends the use of long-handled
brushes for sweeping up surface debris that will accumulate on the floor of the oven during use� Use a natural fiber brush
brushing towards the doorway where it can be easily removed with a dough cutter or spatula� For deeper cleaning, use
a brass bristled brush� The oven floor can be then cleaned with a damp (not wet) rag wrapped around the brush head�
Wood Stone offers an assortment of oven brushes available through your dealer� Specification sheets may be viewed on
the Wood Stone website under Tools & Accessories�
NEVER PLACE ANYTHING IN OR ABOVE THE RADIANT FLAME.
NEVER SWEEP DEBRIS INTO THE RADIANT BURNER. THIS CAN CAUSE THE BURNER TO CUT OUT, DAMAGE
BURNER COMPONENTS, AND/OR EFFECT BURNER PERFORMANCE. PROBLEMS CAUSED BY DEBRIS IN
THE RADIANT BURNER WILL NOT BE COVERED BY THE OVEN WARRANTY.
NEVER USE ICE, EXCESSIVE WATER, ANY LIQUID, OR ANY TYPE OF CLEANING CHEMICAL ON THE OVEN
FLOOR. DOING SO CAN SEVERELY DAMAGE THE OVEN CERAMIC AND THIS DAMAGE WILL NOT BE COVERED
UNDER WARRANTY.
NIGHT HEAT RETENTION DOORS
The door(s) are used for nighttime heat retention� Do not operate the oven with doors in place.
Night Heat
Retention Doors