Instructions / Assembly

1 of 2

Diagram 1

Willow Springs Woven Chat Chair

RXAW-408

Assembly Instructions

Step 1: Remove protective wrapping first. Then lay all parts on floor and identify all parts packed in carton

against attached parts list.

Step 2: Attach Front Leg (B) and Rear Leg (C) to the Chair Base (A) as shown in Diagram 1, using Bolt(D).

Step 3: Make sure all bolts are aligned properly and tightened sufficiently.

NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND TIGHTENED

PROPERLY AND SECURELY.

PAGE 1
Willow Springs Woven Chat Chair RXAW-408 Assembly Instructions Step 1: Remove protective wrapping first. Then lay all parts on floor and identify all parts packed in carton against attached parts list. Step 2: Attach Front Leg (B) and Rear Leg (C) to the Chair Base (A) as shown in Diagram 1, using Bolt(D). Step 3: Make sure all bolts are aligned properly and tightened sufficiently. NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND TIGHTENED PROPERLY AND SECURELY.
PAGE 2
PART LIST Ref Part Name Part Image Qty Ref Part Name Part Image Qty A Chair Base 1 D Bolt (M6) 12 B Front Leg 2 E Hex Wrench 1 C Rear Leg 2 WOODARD Customer Service Hours 8:00am-5:00pm CST Monday to Friday Phone: (800) 877-2290 Fax: (800) 733-4257 PRINTED IN CHINA 2 of 2