Installation & Assembly

When people sit, press “Front cleaning” button, it

will clean the front portion of body; repress “Front

cleaning” button or “Power” button, the function will

be finished. After a cycle, this function will be

finished automatically, if people keep sit, it will

switch to drying function, and will stop after a cycle.

1.When people sit, press “Rear cleaning” button, it

will clean the rear portion of body; repress “Front

cleaning” button or “Power” button, the function will

be finished. After a cycle, this function will be

finished automatically, if people keep sit, it will

switch to drying function, and will stop after a cycle.

· The operating method of remote control shows in instruction manual.

Power

1. Long press “Power” button to enter standby mode;

and then quick press “Power” button to restore

functional mode.

2. When people sit, press “Power” button to stop the

function of rear, front cleaning or drying. When no

one sits, press “Power” button to switch between

function mode and power save mode.

3.If the product is not used for continual 72 hours,the water in the tank will

automatically discharge for 90 seconds and replaced by fresh water,to avoid bacteria.



Remark:

1. When main unit is in functional mode, the light of power goes on and energy saver

light is off; When in energy save function, the light of power goes off, and energy

saver light is on; When in standby mode, both lights are off.

The default setting of all function is on middle level, after using remote-controller,

shift to the level showing on remote-controller.

Function illustration of keys in main unit and actuator

Front

cleaning

button

Rear

cleaning

button

Function illustration of keys in remote-control and LCD display instruction

2.When no one sits,press “Rear cleaning” button,then

the wand will stretch out to clean the nozzle and

spray wand.