Installation & Assembly

Inlet filter cleaning
1.Pull out electrical plug,then shut off water supply valve and
remove water supply hose.
2.Remove the filter.Use the brush to clean the filter.
3.Put the filter back into inlet after cleaning.Then connect the
water supply pipe.
Remove the filter.
Use the brush to
clean the filter.
When room temperature is under zero and electricity is disconnected,or user is away for a
long time.The water inside the tank should be discharged.
1) Open the tank cover,press the discharge button,turn on valve to discharge the water.
2) Slightly press the discharge button protruding part to turn off discharging valve and cover.
Turn on cover
Press downward the
protruding part
Press inward the
discharging button
Note：Before water discharging, the power must be cut off!
11
Tank anti-freezing and anti-bacterial maintenance