Installation Guide

WOODBRIDGE

www.woodbridgebath.com

WOODBRIDGE

Before Installation

1.Turn on the angle valve

Check thread connection,make sure no leakage is found.

Angle valve

ELECTRONIC BIDET TOILET

3.Self-inspection

3. Start function mode for normal usage.

1. The main unit buzzer rings ﬁrst "click", power indicator (POWER) and Energy-conservation

indicator (ENERGY SAVER) ﬂash. Power indicator lights on and Energy-conservation indicator

2.gets off to start self-inspection.

The main unit buzzer rings second "click" to indicate ﬁnish of self-inspection, power indictator

lights on, and Energy-conservation indicator keeps off.

2.Power Connection

Insert power line leakage protection plug into the power socket, press the reset switch,

plug indicator lights on indicating that the power is on.

Tips:

Press electric leakage test button prior to

usage, the reset switch pops up indicating

that the leakage protection function is normal.

Press the TEST button (then RESET button)

every month to assure proper operation.

Current detection

test button

Reset switch

Indicator light

RESET

REMETTRE

TEST

TEST BEFORE EACH USE

1. PLUG INTO RECEPTACLE

2. PRESS RESET BUTTON:

VISUAL INDICATOR APPEARS.

3. PRESS TEST BUTTON:

VISUAL INDICATOR DISAPPEARS.

4. PRESS RESET FOR USE.

DO NOT USE IF ABOVE TEST FAILS.

WARNING:

*Suitable for the product with leakage protection plug.

*Please refer to the actual product.