USER MANUAL B0970S WOODBRIDGE R Remote Control Illustration Thank you for choosing our product.Please read the instructions carefully before installation and keep it available for future maintenance or reference. Customer Service Phone: 562-229-0088. (Monday - Friday 9 AM - 5 PM Pacific Time) Or Email: help@woodbridgebath.com www.woodbridgebath.com 202056 REV.
WOODBRIDGE R REMOTE CONTROL ILLUSTRATION 安装准备 Installation Preparation Remote control installation Remote control hanger installation (1) Place the remote control hanger upright on the pre-installed area of the wall and mark the location of the two mounting holes on the wall with a marker. Drill a hole in the marked position on the wall with a drill bit of 6 mm in diameter, with a depth of 35 mm.
WOODBRIDGE R REMOTE CONTROL ILLUSTRATION Installation Preparation Remote control installation Remote control hanger installation（Only for the hanger matching with fixing board and foam gasket.） (1) Clean and dry the pre-installed area of the remote control rack on the wall. (When determining the installation location, make sure that the user can reach remote control when he sits on the seat.
WOODBRIDGE R REMOTE CONTROL ILLUSTRATION Usage Instruction Remote control illustration Rear cleaning/massage Water increasing Nozzle moving forward Front cleaning/massage Water reducing Nozzle moving backward Drying Auto rear cleaning Auto front cleaning Indicator light(only visible when the light is on) Dryer temperature Stop/Energy saver Water temperature Half flush Seat temperature WATER TEMP DRYER TEMP SEAT TEMP Night light Full flush LIGHT 3 HALF FLUSH FULL FLUSH www.
WOODBRIDGE R Usage Instruction Rear/Front cleaning ·Press “Rear cleaning/massage” button, the indicator light is on showing current water temperature level, it starts rear cleaning; Press again “Rear cleaning/massage” button to shift to massage to massage cleaning (nozzle moves forward and backward to expand cleaning area). The cleaning will last for a circle and stop automatically, while it will stop immediately if the user presses “STOP” button.
WOODBRIDGE R Usage Instruction Water volume adjustment · Presss “+” or “- ” button when it is under function of rear cleaing or front cleaning, the indicator light will be on showing current water volume level, adjust water volume by levels. Spray nozzle position adjustment · Presss “∧” or “∨” button when it is under function of rear cleaing or front cleaning, the indicator light will be on showing current nozzle position, adjust nozzle position by 5 levels.
WOODBRIDGE R Usage Instruction Energy saver Keep pressing “STOP” button for more than 3S to enter energy saving mode, the indicator light will be off and energy saving light will be on. Keep pressing “STOP” button again for more than 3S to exit energy saving mode, the indicator light will be on and energy saving light will be off. Energy saving Under energy saving mode, seat temperature is low(level 1) to achieve energy saving.
WOODBRIDGE R REMOTE CONTROL ILLUSTRATION Usage Instruction Temperature adjustment · Water temperature adjustment Short press the “WATER TEMP” button to adjust the water temperature. The indicator will show the water temperature level if it’s on. When the indicator is off, the water level is 0. Short press this button to adjust water temperature level from 0 to 5 in cycle. (Note: the water temperature is set at 10±2.
WOODBRIDGE R REMOTE CONTROL ILLUSTRATION Usage Instruction Other Operations User Code · The user code needs to be set to avoid disturbance from remote controls when more than one smart toilets are used in the house. Turn on the toilet for setting while turning off others.Press user code combination buttons (Press “STOP” button first and then press “REAR” button) to enter user code setting mode, the indicator lights will be on and keep flashing. · Press water volume “+”“-” buttons to select user code.
WOODBRIDGE R NOTES INSTALLER INFORMATION DATE OF INSTALL: INSTALLER’S NAME: PLUMBER: CONTRACTOR: LICENSE #: 9 www.woodbridgebath.
Thank you for using WoodBridge products! Customer Service Phone: 562-229-0088. (Monday - Friday 9 AM - 5 PM Pacific Time) Or Email: help@woodbridgebath.com www.woodbridgebath.com ASVFAF0321004A-1.
