Installation Guide

WOODBRIDGE

1/8”

Tub wall

3. Place a level across the boom of the tub and adjust the tub feet leveler to touch the level. Then raise the

leveler addional 1/8” or 3/16” so that the weight of the tub, water and user are fully supported by the feet

adjuster and not the tub walls.

5. Clean the surrounding of the drain pipe with cloth in preparaon of seng the drain, the area should be dry

and free of any debris. Apply a bead of clear silicon or plumber puy around the drain body and pass it through

the drain hole, also apply plumber puy to the washer and slide it over the boom of the drain body.

4. Measure the actual distance from drain into drain pipe on ﬂoor and the drain pipe should extend approximately

1” above the ﬁnish ﬂoor. Use a drain adapter (not provided) if necessary.

Floor surface

Tub feet leveler