Owner Manual

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
8
www.woodbridgebath.com
CLEANING & TROUBLESHOOTING (FILL VALVE)
Shut off water supply line
before filter cleaning.
Water level is too high or
too low
Improper water level
adjustment
Adjust the water level
Fill valve fails to shut off
or fails to fill the water
into the toilet's tank
1. Inlet valve switch is
turned on.
2. Inlet valve float crashed
against ceramic wall
3. Filter screen is clogged
due to dirty water
4. Improper refill hose
installation
1. Turn on inlet valve switch
2. Adjust inlet valve position
3. Clean the filter screen
4. Install refill hose correctly (see
diagram on the right)
Carefully, take out the filter
from inlet by using pliers.
Use water to wash and clean
the filter and adapter from any
debris.
Re-install the filter and
re-connect the water supply
line.


99<' !<9' 3£<ধ32
3£<ধ32

Water
'='£