manual

!
IMPORTANT
Included:
2.5mm allen wrench
3mm allen wrench
(2) 1/4-20 low prole screws (1 install, 1 spare)
15mm Cheese Rod
1. Choose desired camera position on BASE
2. Adjust STRAIGHT position and tighten M3 screws
3. Tighten low prole screw to camera bottom
9
5. Slide PINCH into camera shoe mount
6. Loosely tighten M4 socket cap screws
6
QUICK CAGE (DSLR)
INSTALLATION
STOPPER
TOP
ROD
BASE
7
8
PATENT PENDING
© Wooden Camera LLC 2011-2013
Push BASE until contact is made with
STOPPER before tightening thumbscrew.
3
STRAIGHT
7. Align TOP rod hole with BASE rod hole
8. Inset ROD through TOP into BASE
10. Tighten M4 screws to secure ROD
9. IMPORTANT Tighten M4 screws to secure PINCH
before moving to step 10
PINCH
!
10
10