User Manual Police Launch Kit 400mm
LIST OF PARTS
You will find the following parts in the box. Please check the list carefully and contact your retailer
if anything is missing. Use this list in conjunction with the drawings of the laser-cut parts at the
end of this manual.
Part No. Description Quantity Material
1 Frame 1 3mm ply
2 Frame 1 3mm ply
3 Frame 1 3mm ply
4 Motor mount beam 1 3mm ply
4a Motor mount bracket 1 3mm ply
4b Motor mount nut (M3) 2 Mild steel
4c Motor mount bolt (M3) 2 Mild steel
4d Motor mount washer (M3) 2 Mild steel
5 Frame 1 3mm ply
6 Frame 1 3mm ply
7 Servo and battery tray 1 3mm ply
8 Transom 1 3mm ply
9 Keel 1 3mm ply
9a Keel doubler 4 1.5mm balsa
9b Keel trebler 2 1.5mm ply
10 Deck support 1 3mm ply
11 Chine stringer 2 3mm sq. ply
12 Gunwale 2 6 x 3mm ply
13 Stern skin 1 1.5mm ply
14 Rudder support 3 3mm ply
15 Bottom skin 2 1.5mm balsa
16 Side skin 2 1.5mm balsa
17 Bow profile blocks 28 3mm balsa
18 Bow deck coaming 1 3mm ply
19 Forward deck coaming 2 3mm ply
20 Aft deck coaming 2 3mm ply
21 Stern deck coaming 1 3mm ply
22 Spray rails 2 3mm sq. ply
23 Deck frame 1 3mm ply
24 Deck 1 1.5mm ply
25 Cabin side 2 1.5mm ply
26 Cabin internal support 1 1.5mm ply
27 Cabin side (rear) 1 1.5mm ply
28 Cabin internal support 2 1.5mm ply
29 Cabin front 1 1.5mm ply
29a Upper cabin front 1 1.5mm ply
30 Fwd cabin roof 1 1.5mm ply
31 Wheelhouse windscreen 1 1.5mm ply
32 Wheelhouse roof 1 1.5mm ply
33 Comms equipment roof 1 1.5mm ply
34 Deck magnets 2 (4 pcs) 6mm diameter
35 Hatch cover 1 1.5mm ply
35a Hatch cover 1 1.5mm ply
36 Radar platform 1 1.5mm ply
37 Wheelhouse windscreen 1 Perspex
38 Wheelhouse side window 2 Perspex
39 Wheelhouse roof window 2 Perspex
40 Comms mast 1 Printed plastic
41 Life ring 2 Printed plastic
42 Steering wheel 1 Printed plastic
43 Vent casing 4 Printed plastic
44 Stanchions 15 Steel (cotter pin)
45 Handrail 1 Steel wire
46 Mast top 1 2mm dowel
46 Stand end plates 2 3mm ply
47 Stand name plates 2 3mm ply
GENERAL INFO: STICK WITH US!
As one of the UK’s leading model and hobby distributors the team here at J Perkins are acutely aware that quality
tools and materials play a vital part in the successful completion of any model build. Fortunately our staff are active
modellers too, so we’re very fortunate in being able to both supply and thoroughly recommend the perfect glues,
paints and materials that are needed to complete your Riviera to a very high standard. We can do this because
we’ve built one too. Actually, more than one!
RECOMMENDED MATERIALS
The following is a list of the recommended materials you’ll need in order to complete the model as
depicted on the box and in the accompanying drawings and photographs (see jperkins.com).
Description J Perkins Part No.
MD Aliphatic White Glue MDP5524821
ZAP Epoxy (15 min) 5525782-1
ZAP Canopy Glue (for the windows) 5525725-1
MD Super Filler MDP5524830
500-Grit Sandpaper –
800-Grit Sandpaper –
1200-Grit Sandpaper –
Sanding block –
Guild Lane Sanding Sealer 60ml jar) GLDCEX1100060
Guild Lane High Build Primer (400ml aerosol) GLDCEX0960400
Guild Lane Satin Fuel Proofer (400ml aerosol): GLDCEX1310400
Chroma Enamel Gloss White (400ml aerosol) GLDCHR6400
Chroma Enamel Gloss Black (400ml aerosol) GLDCHR6403
Chroma Enamel Gloss Red (400ml aerosol) GLDCHR6401
Chroma Enamel Gloss Green (400ml aerosol) GLDCHR6417
Oratrim Fluorescent Yellow ORA27-031-002
Oratrim Sky Blue ORA27-053-002
Model Technics White Trimline 5523674
Low-tack double-sided tape _