Submittal Sheet

C INLET
COMBINATION
Copper Sweat Fitting
1/2” K,L Or M Inside
3/4” M Only Outside
Freezeless
Hot & Cold
Wall Faucet
Model 22 & V22
This unit offers anti-siphon protection and pressure
relief valves.
The freezeless Model 22 hot and cold faucet is designed
and intended for year-round hot and cold irrigation and
cleaning purposes regardless of outside temperature.
Separate hot and cold inlet tubes allow for manually
operated temperature control with cross contamination
protection. This faucet contains patented pressure relief
valves that prevents the faucet from bursting in freezing
weather should a hose be accidentally left on. The Model
22 contains an integral backow protection device and
does not require and add-on vacuum breaker.
When ordering, specify model, inlet and wall thickness
©2012 WOODFORD Mfg. 0508
Rev. 3/12 Form No. 22.119
CP3 INLET
COMBINATION
3/4” Male Pipe Thread
3/4” Female Sweat
CP INLET
COMBINATION
1/2” Male Pipe Thread
1/2” Female Sweat
P INLET
COMBINATION
1/2” Female Pipe Thread
3/4” Male Pipe Thread
INLET OPTIONS
PX INLET
1/2” PEX Tube Fitting
PX3 INLET
3/4” PEX Tube Fitting
W INLET
1/2” Wirsbo PEX Tube Fitting
W3 INLET
3/4” Wirsbo PEX Tube Fitting
Available in two models:
• Model 22 Horizontal Mount - Rough Brass
• Model V22 Vertical Mount - Rough Brass for end wall
installation
For Installation / Troubleshooting Instructions go to
www.woodfordmfg.com or call 1-800-621-6032
INSTALLATION REQUIREMENTS:
• The faucet length used is to be comparable to what
would be used with standard freezeless faucets.
• The inlet connection must be located in a heated area.
• The gap between the house and faucet must be
sealed to prevent air leaks.
• The faucet must be installed with a slight downward
pitch toward the nozzle.
• Adequate insulation is required around the faucet,
wall board and sill plate.
SPECIFICATIONS:
• Manufactured under one or more of the following
patents: 3,208,715; 3,278,201; 5,590,679; 5,632,303;
6,142,172; 6,532,986 and patents pending
• ASSE 1019 Listed
• CSA, UPC, cUPC Approved
• Not intended for continuous use
FEATURES:
• Patented resetting pressure relief valve prevents the
faucet tube from bursting in freezing conditions
even if a hose is unintentionally left on.
• Built-In Vent Float style Vacuum Breaker
• Faucet drains automatically when hose is removed
• EPDM packing to prevent leaking
• Oval, powder-coated, die cast aluminum handle
• Stainless steel seat - eliminates wire draw
• Standard “O” size seat washer
• Tee Key conguration - (extra charge)
• No-lead solder
• 3/4” male hose thread
MAX PRESSURE - 125 p.s.i.
MAX TEMPERATURE - 120° F
R
R
U
P
C
R
Model V22
Model 22