Use and Care Manual
Solid
Product #600
Longest Lasting Wood Stain & Sealer
Technical Data Sheet
Makes Old Wood Look New!
10 Year Warranty
100% Acrylic Stain and Sealant in One
UV Resistant
Mildew Resistant
Ultimate Waterproofing Protection
Fade and Wear Resistant
Environmentally Friendly
Self Priming
____________________________________________________________________________________________________________
WOOD Rx Solid is a 100% acrylic solid color wood stain designed to effectively seal, protect and beautify wood and composite
surfaces. Its specialized formula resists moisture penetration, mildew, water staining and uneven discoloration. WOOD Rx Solid is
designed for maximum performance in any climate. WOOD Rx Solid is available in any color and produces a finish which is durable
and easy to maintain. WOOD Rx Solid is the best prescription for solid wood protection.
____________________________________________________________________________________________________________
RECOMMENDED USES:
For use on virtually all properly prepared, exterior wood surfaces such as decks, docks, sidings, specialty hardwoods, pressure treated
lumber, garden furniture, playhouses, composite decking, siding and log/timber frame homes. Contact an INSECO representative for
detailed specifications.
SURFACE PREPARATION:
Dirt, grease, grime and any foreign material should be removed before applying WOOD Rx Solid. Be sure surface is clean and dry.
1. Apply a solution of 1 part household bleach or bleach alternative, 1 part dishwashing soap and 4 parts water.
2. Scrub and/or pressure wash as necessary to remove any surface contaminants.
3. Apply a test sample of WOOD Rx Solid to insure proper adhesion and an appealing appearance. If beading or crawling occurs,
contact INSECO prior to applying.
***Note: When applying a solid wood stain to new or uncoated wood, there is a possibility that tannin stains may appear.
Certain wood types and colors may be more susceptible to tannin stains than others. Please contact INSECO to learn more
regarding tannin staining and how to prevent or minimize it.
APPLICATION:
1. Stir WOOD Rx Solid thoroughly before use.
2. Apply with a brush, roller or airless sprayer
3. Apply 1-2 coats as required to achieve a uniform appearance. Two coats are recommended for maximum
performance. Allow 2-4 hours between coats.