Instruction Manual

ManualsBrandsWOODS AND GO DESIGN ManualsDomestic AppliancesThermo Cooker

1 / 21

Instruction Manual

Model: 93404-182428

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the

following:

1. Read all instructions.

2. To protect against risk of electrical shock do not put the plug, power cord, bowl and base unit in

water or other liquid.

3. Unplug from outlet when not in use, before putting on or taking off parts and before

cleaning.Flashing light (or identify other means used) indicates ready to operate. Avoid inadvertent

contact with the touch screen.

4. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking

off parts.

5. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any

control to “off’, then remove plug from wall outlet.

6. Keep body parts, jewelry and loose clothing away from moving parts and fitted tools/attachments.

Avoid contacting moving flashing light indicates ready to operate. Avoid any contact with blades or

moveable parts. Keep fingers out of discharge opening.

7. Always remove the blade before pouring contents from the bowl.

8. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly

attached.

9. Always operate blender with cover in place.

10. Keep hands and utensils out of container while blending to reduce the risk of severe injury to

persons or damage to the blender. A scraper may be used but must be used only when the blender

is not running.

11. Never use a damaged appliance. Get it checked or repaired.

12. Do not exceed the maximum fill level marked on the inside of the bowl.

Summary of content (21 pages)

PAGE 1
Instruction Manual Model: 93404-182428 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the f ollowing: 1. Read all instructions. 2. To protect against risk of electrical shock do not put the plug, power cord, bowl and base unit in water or other liquid. 3. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.Flashing light (or identify other means used) indicates ready to op erate.
PAGE 2
13. Never let the power unit, cord or plug get wet. 14. Be careful when handling or touching any part of the appliance when being used in the cook mode or af ter cooking. In particular the bowl, lid and tools as they will remain HOT long after the appliance has been switched off. 15. Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the food processor.
PAGE 3
3. Always ensure food is thoroughly cooked and is piping hot before eating. 34. Food should be eaten shortly after cooking or allowed to cool quickly and then ref rigerated as soon as possible. 35. Misuse of your appliance can result in injury. 36. A short power-supply cord is used to reduce the risk resulting from it being grabbed by children, becoming entangled in, or tripping over a longer cord. 37.
PAGE 4
53. Surfaces are liable to get hot during use. 54. For how to clean the surfaces in contact with food please ref er the paragraph of Care and Cleaning. 55. CAUTION: Ensure that the appliance is switched off before removing it from the stand. 56. Before plugging in, Make sure your electricity supply is the same as the one shown on the underside of your appliance. 57. WARNING: THIS APPLIANCE MUST BE GROUNDED. 58.
PAGE 5
1, Product overview 2, Parts 1 24 2 19 3 18 4 5 6 7 23 22 17 16 21 20 8 11 9 12 13 10 14 15 1 24 2 19 3 18 4 5 6 7 22 17 16 8 11 9 12 13 10 14 5 / 21 23 15 21 20
PAGE 6
3, Display screen 1）DIYUI 30/31/32 2） 28 Auto programs UI 29 33 3）Recipe UI 6 / 21
PAGE 7
37 38 4）Setup UI 39 5） HomeUI 7 / 21
PAGE 8
41 4, Key Parts No. Name No. Name No.
PAGE 9
1 2 max max Insert the Jug into the Main Unit .Press down f irmly to lock into place .(LOGO in f ront),Max in Place the drive shaft correctly locked into the jug . back) 4 3 Add the ingredients or water to the jug .If need f ood processor f unction . Then you need to attach food processor lid and put ingredients directly Choose difference accessories for difference cooking purpose . through food dispenser .
PAGE 10
8 7 Click af ter set the temperature, time and speed to start, then the icon will change to the machine is working now. , Slide the corresponding icon or rotate the knob to set the temperature, time and speeds. Click the minute or second in the time icon to quickly set the exact time. Reverse function: Click the icon rotating direction for shift 9 Click or push button in knob to pause working, click or continuously press the push button in knob to stop working and exit the program.
PAGE 11
12 Click the recipe photo, enter into recipe interf ace, click to check all the recipe details. Click By sliding right in screen or click the left dot in red circle or turn the knob in anticlockwise to go start and to f or favorite collection. to recipe menu. Click the or click the middle dot in red circle to go back to the initial step for reset. 13 14 Af ter cooking ,Screen will shows end .Press the The recipe has preset parameter. Click to start.
PAGE 12
16 15 Blender jugcan be washed by dry dishcloth or wash it with water, But do not immersed in water ; Do not put it intothe dish-washing machine Accessories which can put into dishwasher. 17 Clean the main unit 6, Control Panel Overview Serial number Icon Function description 12 Rotary knob （1） Can be used to setting temperature ,time, speed ;or UI， Auto program, recipe. （2） Press the knob and the cooker will suspend when cooking .It will continue cooking if your press again.
PAGE 13
27.1 Reverse The speed rang:1-3 27.2 Speed：Click range：0-12 to shift between clockwise and reverse Speed 26 Display set time parameter:0-90 minute Operation time display: 0-90 minute 25.1 Display set temp parameter Temp rang: 37-120℃ Af ter 37，40℃, in intervals of 5° 25.2 Close/Open Icon / 25.3 Food /ingredients temp,After 37，40℃, in intervals of 5° 28 / / ：star，：pause : stop Botton 30 Setup Button: set or check robot cook info including:Wifi,System version,Language ,etc.
PAGE 14
33.3 Slow Cook Time：60(Range:10-90) minutes Temp: 100(Range:60-100)℃ Speed: 1(Range:1-3) 33.4 Boil Temp: 100(Range:60-100)℃ 33.5 Food Processor Time：30(Range:10-60) seconds Speed: 5(Range:4-6) 33.6 Chop Time：10s(Range:10s-4m) Speed: 6(Range:1-12) 33.7 Turbo Time：60s Speed: 12 Press or Press Knob and release to stop 33.8 Weigh Max：5Kgs 5g interval 33.8.1 Tare 33.8.
PAGE 15
35 A-Z 36 search 37 More Including favorite collection and history 44 Exit 45 Favorite/History / 46 Ingredients Picto 47 Cooking step 48 Chef’s tips 49 Accessories Picto 50 Check recipe info including 7. Setting the time 7.1: Time range：0-90minutes 7.2 click ，click min or sec, slide or rotate the knob to set time 8. Setting the temperature 8.1: Temperature range: 37-130℃，with 5℃ interval 8.
PAGE 16
9. Setting the speed 9.1: Speed range: 0-12 9.2: click , slide the picto or rotate the knob to set the speed 9.3 ： click ，shift to 9.4: ，with speed setting 1-3 Speed 1-3: Speed 1-4: Speed 1-12 10. start,pause and stop 10.1 start 10.2 Pause 10.3 Stop During standby mode,white and red lights flash.
PAGE 17
11, Suggested Usage Method Function Accessory Speed Time Maximum cooking ingredients in one time Chopping Speed blade 8-12 Chopping Speed Blade 8-12 Blender Chopping Blade Speed 12 Chopping Chopping Speed 5 15s-30s 500g Speed 1 2mins 500g flour + 250g water + 20g Meat Chopping Ice Crush 60s 400g Beef / pork without bone/tendon 10-20s 400g ice cube 1min Maximum Capacity: 2000ml 800g carrot 1200g water （Onion,Shallot,Celery.
PAGE 18
13. Cleaning and Maintenance Please unplug the power cord before cleaning ； Blender jugcan be washed by dry dishcloth Please use dry and soft cloth to clean power cord . or wash it with water, But do not immersed in water ;Do not put it intothe dish-washing machine Please use dry dishcloth to clean the main unit .Do not wash them with water or put it into the dish-washing machine .
PAGE 19
15 .Reset temperature control When over temperature the Jug does not work , you can Press the temperature button to reset temperature control, after cooling the Jug ,the Jug can work. temperature button Press it and “Click” 16.
PAGE 20
Slicer/ shred Slices 5-6 30-60s disc Steamer Fish… Only Food processor program --- 10-60 Steam program: minutes Middle/Big 17．Firmware Update 1， Pls contact with qualified maintenance personnel for service. 2， Put machine bottom upwards, unscrew the cover of USB. 3，Put the decicated USB into socket of Power USB or Android USB and connect dedicated update f irmware. 4，Screw cover after update firmware is completed. This device complies with Part 15 of the FCC Rules.
PAGE 21
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.