Company Chipper User Manual

2
PN-51210 (Rev. 7/98)
This chipper is designed and tested to offer reasonably safe service.
Failure to operate it in accordance with the following safety
instructions MAY RESULT IN PERSONAL INJURY!
• Read the owners manual before operating this equipment.
• Do not allow children to operate this equipment.
• Do not operate this equipment in the vicinity of bystanders.
• Do not allow handsor any part of body or clothing inside the
feeding chamber, discharge chute, or near any moving part.
• Shut off the power source and make sure all moving parts are com-
pletely stopped before inspecting or servicing any part of the machine.
• Wear safety glasses at all times while operating the machine. One pair is
provided with each chipper.
• Avoid wearing loose-fitting clothing. Never operate this machine
wearing loose clothing particularly if it has drawstrings which can wrap
around or get caught in the machine.
• Operate the machine only on a level surface.
• Do not operate the machine on a paved, concrete, or hard gravel surface.
Operating on a hard surface causes discharged material to rebound and
kickback. It will also cause increased machine vibration. Increased
vibration causes the machine to move and will promote premature wear
of parts or loosening of fasteners.
S AFETY I NSTRUCTIONS
Safety Instructions
Before Operating
Preparation
CAUTION
You WILL be KILLED or
SERIOUSLY HURT if you don't
follow instructions
You CAN be KILLED or
SERIOUSLY HURT if you don't
follow instructions.
You CAN be HURT or DAMAGE
machine if you don't follow
instructions.
DANGER
WARNING
A safety message alerts you to potential hazards that could hurt you or others.
Each safety message is proceeded by one of three words: DANGER,
WARNING, or CAUTION.