Company Brush Cutter User Manual

Safety 11
MAN0764 (11/5/2008)
SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged!
2 - FRONT AMBER REFLECTOR
(PN 1002940)
3 - REAR RED REFLECTOR
(PN 57123)
4 - PN 18869
SHIELD MISSING
DO NOT OPERATE - PUT SHIELD ON
18869-B
DANGER
BE CAREFUL!
Use a clean, damp cloth to clean safety decals.
Avoid spraying too close to decals when using a
pressure washer; high-pressure water can enter
through very small scratches or under edges of
decals causing them to peel or come off.
Replacement safety decals can be ordered free
from your Woods dealer. To locate your nearest
dealer, check the Dealer Locator at
www.WoodsEquipment.com, or in the United States
and Canada call 1-800-319-6637.
If shaft connection is visible, shield
is missing. Replace shield before
operating equipment.
DA
NG
NG
ER
ER
1004114
17 - PN 1004114
PN 1006348 (located on split rim wheels)
(Safety Decals continued on next page)
1 - SERIAL NUMBER PLATE
MODEL NO. SERIAL NO.
Woods Equipment Company
Oregon, Illinois, U.S.A.
WARNING
RELEASE ALL AIR PRESSURE BEFORE LOOSENING BOLTS.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.
MAX. SPEED: 20 MPH, MAX. WEIGHT: 4000 LBS., MAX. AIR PRESSURE: 40 PSI.
1006348
EXPLOSION
HAZARD