User Guide

12 Safety
MAN0654 (Rev. 10/19/2007)
Check for leaks with cardboard; never use hand.
Before loosening fittings: lower load, release pressure, and
be sure oil is cool.
Consult physician immediately if skin penetration occurs.
WARNING
19924-B
6 - PN 19924 (PULL-TYPE ONLY)
7 - PN 1004991 (PULL-TYPE ONLY)
TRANSPORT LOCK
AND CYLINDER
REQUIREMENTS
1004991
TRANSPORT
LOCK
WARNING
RAISED CUTTER CAN DROP AND CRUSH
e
rs must be e
q
ui
pp
ed with trans
p
ort lock
.
Cutt
e
ds.
sta
n

r
ansport components must be functional, kept in
g
oodAll t
r


Blocking up prevents cutter dropping from hydraulic leak down,
Bloc
hydraulic system failures, or mechanical component failures.
FAILURE TO FOLLOW INSTRUCTIONS CAN
RESULT IN SERIOUS INJURY OR DEATH.
28-1/4"
SINGLE-ACTING FULL
EXTENSION
BE CAREFUL!
Use a clean, damp cloth to clean safety decals.
Avoid spraying too close to decals when using a pressure washer; high-pressure water
can enter through very small scratches or under edges of decals causing them to peel or
come off.
Replacement safety decals can be ordered free from your Woods dealer, or in the United
States and Canada call 1-800-319-6637.
SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged!