Operator`s manual

ManualsBrandsWoods ManualsBusiness equipmentS27CD

42 Assembly

MAN0500 (3/24/2006)

Open-Center Valve to Open-Center with

Power-Beyond Conversion

Figure 37. Open-Center Valve with Power-Beyond

NOTE: Install hoses after mounting valve on tractor.

1. Place the valve on work area with the control

levers on the left. Remove plastic plug from left port

and steel plug from right port.

2. Install power-beyond sleeve (7) in right port. Make

sure power-beyond sleeve, O-ring and seal seat

properly (see cross section).

3. Install reducer bushing (3) and swivel elbow (2)

into power-beyond sleeve. Connect return hose (4)

to this elbow.

4. Install reducer bushing (3) and swivel elbow (2)

into left port. Attach low-pressure tank hose (6) and

couplers (5) to this elbow.

5. Install reducer bushing (3) and swivel elbow (2)

into port in opposite end of valve. Attach pressure

hose (4) to this elbow.

Open-Center Valve to Closed-Center Valve

Conversion

Figure 38. Closed-Center Valve

NOTE: Install hoses after mounting valve on tractor.

6. Place valve on work area with control levers on left.

Remove plastic plug from left port and steel plug

from right port.

7. Install POWER-BEYOND sleeve (7) and plug (8) in

right port. Make sure POWER-BEYOND sleeve, O-

ring and seal seat properly (see cross section).

8. Install reducer bushing (3) and swivel elbow (2)

into left port. Attach low-pressure tank hose (6) and

couplers (5) to this elbow.

9. Install reducer bushing (3) and swivel elbow (2)

into port in opposite end of valve. Attach

PRESSURE hose (4) to this elbow.

1. 3-Spool, 3-way hydraulic valve

2. 1/2" Male x 3/8" female 90° swivel elbow

3. 3/4" x 1/2" Reducer bushing

4. 3/8" x 60" 1-Wire hydraulic hose

5. 1/2" x 3/8" Hydraulic hose coupler

6. 1/2" x 70" Low-pressure hydraulic hose

7. Power-beyond sleeve kit