MODEL W1764 1/8 HP Power feedER OWNER'S MANUAL Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC. #9695CR WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
This manual provides critical safety instructions on the proper setup, operation, maintenance and service of this machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputation, electrocution or death. The owner of this machine/equipment is solely responsible for its safe use.
INTRODUCTION....................................... 2 Woodstock Technical Support................... 2 SETUP................................................ Unpacking........................................ Inventory......................................... Machine Placement............................. Cleaning Machine................................ Assembly.......................................... Base Mounting................................... 10 10 10 11 11 12 15 MAINTENANCE.......................
INTRODUCTION W1764 Power Feeder INTRODUCTION Woodstock Technical Support This machine has been specially designed to provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of this product.
MACHINE MACHINE SPECIFICATIONS SPECIFICATIONS Phone #: (360) 734–3482 • Online Tech Support: tech–support@shopfox.biz • Web: www.shopfox.biz MODEL W1764 SMALL POWER FEEDER Motor Type ................................................................................................ Universal Variable Speed Horsepower .............................................................................................................. 1/8 HP Voltage .....................................................................
INTRODUCTION W1764 Power Feeder Shipping Dimensions Type ................................................................................................................. Cardboard Content ................................................................................................................. Machine Weight .................................................................................................................... 27 lbs. Length/Width/Height ................................................
INTRODUCTION W1764 Power Feeder Controls and Features Rotation Position Lock Lever Horizontal Position Lock Lever Dust Port ⁄8 HP Motor 1 Vertical Position Lock Lever Horizontal Movement Crank Power Feeder Handle Ball Joint Lock Handle Figure 1. Controls and Features.
W1764 Power Feeder SAFETY SAFETY READ MANUAL BEFORE OPERATING MACHINE. FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL RESULT IN PERSONAL INJURY. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury.
W1764 Power Feeder 10. NEVER LEAVE WHEN MACHINE IS RUNNING. Turn power off and allow all moving parts to come to a complete stop before leaving machine unattended. 11. DO NOT USE IN DANGEROUS ENVIRONMENTS. DO NOT use machinery in damp, wet locations, or where any flammable or noxious fumes may exist. 13. USE A GROUNDED EXTENSION CORD RATED FOR THE MACHINE AMPERAGE. Undersized cords overheat and lose power. Replace extension cords if they become damaged. DO NOT use extension cords for 220V machinery. 14.
W1764 Power Feeder Additional Safety for Power Feeders SAFETY READ and understand this entire instruction manual before using this machine. Serious personal injury may occur if safety and operational information is not understood and followed. DO NOT risk your safety by not reading! Use this and other machinery with caution and respect. Always consider safety first, as it applies to your individual working conditions. No list of safety guidelines can be complete—every shop environment is different.
W1764 Power Feeder ELECTRICAL The machine must be properly set up before it is safe to operate. DO NOT connect this machine to the power source until instructed to do so in the "Test Run" portion of this manual. The Model W1764 is wired for 110V operation. We recommend connecting this machine to a dedicated circuit with a verified ground, using the circuit size below as a minimum.
W1764 Power Feeder SETUP Unpacking This machine has been carefully packaged for safe transportation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Inventory SETUP The following is a description of the main components shipped with the Model W1764. Lay the components out to inventory them. Keep machine disconnected from power until instructed otherwise.
W1764 Power Feeder Machine Placement Table Load: This power feed distributes a heavy load in a small footprint. Some machine table tops may require additional bracing or clamps for correct support. • Working Clearances: Consider existing and anticipated needs, size of material to be processed through the machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your power feed.
W1764 Power Feeder Assembly To correctly position this power feeder on your table top, completely assemble the power feeder first, then refer to Base Mounting on Page 15. The reason for this order, is that with the power feeder unit completely assembled, it will be easier to locate where on the table top you will need to drill your base mounting holes, so you can take advantage of the full range of power feeder swing and adjustments. SETUP To assemble the power feeder, do these steps: 1.
W1764 Power Feeder 9. Place the arm into the arm bracket so the teeth of the gear and arm mesh as shown in Figure 8. Arm Bracket Arm Note: No lubrication is required for the gear or rack teeth. Oil or grease will gather debris making the horizontal adjustment of the power feeder difficult. 10. Secure the arm bracket cover onto the arm bracket with three M10-1.5 x 35 hex bolts and washers (Figure 9).
W1764 Power Feeder 15. Lightly oil the T-handle threads shown in Figure 11. Note: No lubrication is required for the arm bracket and the elbow clamp connection. Oil Threads 16. Position the arm bracket onto the elbow clamp as shown in Figure 12. 17. Thread the T-handle into the elbow clamp so both assemblies are secure as shown in Figure 12. 18. Use the levers to lock the power feeder into position, such as the example shown in Figure 13. SETUP Figure 11. Arm bracket handle threads. Figure 12.
W1764 Power Feeder Base Mounting To correctly position this power feeder on your table top, completely assemble the power feeder first, then refer this section and mount your base to the table using one of the three methods below. The reason for this order, is that with the power feeder unit completely assembled, it will be easier to locate where on the table top you will need to drill your base mounting holes, so you can take advantage of the full range of power feeder swing and adjustments.
W1764 Power Feeder Test Run Complete this process once you have familiarized yourself with all instructions in this manual. If during the test run a source of an unusual noise or vibration is not readily apparent, contact our technical support for help at (360) 734-3482 or contact us online at tech-support@shopfox. biz. SETUP To test run the power feed, do these steps: 1. Read the entire instruction manual first! 2. Make sure all tools and foreign objects have been removed from the tabletop area. 3.
W1764 Power Feeder OPERATIONS General This machine will perform many types of operations that are beyond the scope of this manual. Many of these operations can be dangerous or deadly if performed incorrectly. The instructions in this section are written with the understanding that the operator has the necessary knowledge and skills to operate this machine.
W1764 Power Feeder MAINTENANCE General Regular periodic maintenance on your machine will ensure its optimum performance. Make a habit of inspecting your machine each time you use it. Check for the following conditions and repair or replace when necessary: • • • • • Loose mounting bolts. Worn switch. Worn or damaged cords and plugs. Damaged wheel rubber. Any other condition that could hamper the safe operation of this machine. Cleaning MAINTENANCE Frequently blow-off sawdust with compressed air.
W1764 Power Feeder SERVICE General This section covers the most common service adjustments or procedures that may need to be made during the life of your machine. If you require additional machine service not included in this section, please contact Woodstock International Technical Support at (360) 734-3482 or send e-mail to: tech-support@shopfox.biz. Wheel Replacement Make sure that your machine is unplugged during all service procedures! If this warning is ignored, serious personal injury may occur.
W1764 Power Feeder Electrical Model W1764 Power Feeder Wiring Diagram Fuse 3.15A Ground 250VAC Motor Speed Dial Power Feed Direction Switch Motor PC Board 110VAC 5-15 Plug Universal Brush Type Motor Fuse SERVICE Motor Speed Dial Feed Direction Switch Motor Control PC Board Figure 20. Feeder Control System.
34 43 PARTS -21- 31 17 85 7 25 22 39-5 40 40-1 39-4 39-3 39 33 29 17 17 65 28 38 45 86 38-1 38-2 39-2 39-1 8 71 61 30 51 49 62 47 72 36 20 50 58 89 83 70 46 66 53 8 57 6 54 83 23 14 69 67 56 20 15 60 11 8 16 82 59 63 6 74 6 9 14 79 11 15 1 77 83 19 9 9 81 16 80 75 8 1 12 84 76 14 37 19 15 16 12 36-1 W1764 Power Feeder PARTS
W1764 Power Feeder PART # DESCRIPTION REF PART # DESCRIPTION D3870 X1764006 XPFH29M X1764008 X1764009 X1764011 XPR10M X1764014 X1764015 X1764016 XPR03M X1764019 XPN03M X1764022 XPK34M X1764025 X1764028 X1764029 X1764030 X1764031 X1764033 XPS40M X1764036 X1764036-1 XPS40M X1764038 X1764038-1 X1764038-2 X1764039 X1764039-1 X1764039-2 X1764039-3 X1764039-4 X1764039-5 X1764040 X1764040-1 XPHTEK11M ROLLER SPROCKET CASE FLAT HD SCR M6-1 X 10 BUSHING CASE CAP GEAR KIT 25-TOOTH EXT RETAINING RING 22MM DRIVE S
W1764 Power Feeder Warranty Registration Name____________________________________________________________________________________ Street___________________________________________________________________________________ City__________________________ State____________________________Zip_________________________ Phone #_______________________ Email___________________________Invoice #____________________ Model #_________Serial #______________Dealer Name__________________Purchase Date___________ CUT ALONG DO
FOLD ALONG DOTTED LINE Place Stamp Here Woodstock international inc. p.o.
Warranty Woodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, lack of maintenance, or reimbursement of third party expenses incurred. Woodstock International, Inc.
