Specifications

55
Order 1-800-445-4669
Conestoga Woodworking Supply
ITEM# W1729 – $1,260.00
19" Heavy-Duty Bandsaw
Similar to our 17" bandsaw but with a larger cutting capacity and
heavy-duty construction. This bandsaw is built for serious production!
2 HP, 110V / 220V, single-phase motor, TEFC capacitor start induction, 60 Hz, prewired 220V; Amps: 20/10; RPM: 1,725;
Precision ground cast iron table; Table size: 26-3/4" x 19" x 1-1/2" thick; Table tilt: l0ºL, 45ºR; Floor to table height: 37-1/2";
Overall height: 76"; Overall width: 36"; Overall depth (including fence): 32"; Cutting capacity / throat: 18-1/4"; Maximum cutting
height: 12"; Blade length: 143" long; Blade sizes range: 1/8" - 1"; 2 Blade speeds: 1,700, 3,500 FPM; Wheels: fully balanced cast iron with
polyurethane tires; Wheel covers: pre-formed, hinged steel; Blade guides: roller disc with full enclosure protection and ball bearing design;
Bearings: sealed and permanently lubricated; Approximate shipping weight: 473 lbs.
ITEM# W1736 – $560.00
Benchtop Pin Router
This Benchtop Pin Router is made for routing identical
pieces using shop-made patterns. As the pattern follows
the raised pin in the table, the pneumatic head lowers the
router and router bit. Requires a router motor, router
bits, shop made templates and air compressor.
Four router collars are included to t most major
brands of routers.
Maximum head stroke: 5-1/2"; Maximum distance spindle to table:
6-1/2"; Maximum distance housing to table: 8-3/4"; Throat capacity:
18"; Router collar sizes: 4-1/4", 3-21/64", 3/4" and 3-1/2" x 2-5/8"
high; Router housing diameter: 4-1/2"; Air pressure required: 60
PSI; Table pins: 3/16" x 1/4", 5/16" x 3/8", 7/16" x 1/2"; Table size:
19-3/4" W x 14" D x 1-3/8" H; Overall size: 31-1/8" H x 28-1/4" D x
21-3/4" W; Approximate shipping weight: 60 lbs.
ITEM# W1728 – $589.00
Sliding Router Table
This router table offers a distinct safety advantage because the sliding table allows you
to keep your ngers away from the router bit while cutting (especially important when
proling end grain or irregular wood grain).
Simply clamp the workpiece against the miter
fence and feed the cut by pushing the table.
Table can also be locked in place for use as
a normal router table when the sliding feature
is not needed.
Main table surface: cast iron 30-3/4" x 9-7/8"; Sliding table
surface: extruded aluminum 30-3/4" x 12-1/4"; Table opening
diameters: 4"(w/ 2-1/2" & 1-1/8" dia. insert rings); Table height:
34"; Fence size (two): 12" x 3" extruded aluminum; Approx.
shipping weight: 137 lbs.
ITEM# W1674 – $799.00
2 HP Shaper
We designed this Shaper for maxi-
mum performance at an affordable
cost, with 25% more power and 40%
more weight than other shapers in its
price range.
2 HP, 110 / 220V, single-phase motor; Large preci-
sion ground cast iron table; Table size: 24" x 21";
Spindles: 1/2" and 3/4" (Included); Spindle travel:
3"; Spindle speeds: 7,000 & 10,000 RPM; Spindle
openings: 1-1/4", 3-1/2" & 5"; Powder coated paint;
Power cord size: 10' x 14 gauge; Heavy-duty
miter gauge; All ball bearing construction;
Reversing switch; Approx. shipping weight:
293 lbs.
Bandsaws
Routing Machines
Shapers
ITEM# W1763 – $1,000.00
2-1/2 HP Shaper
Our affordable heavy-duty shaper with all of
the features of its bigger brothers and more:
Built-in mobile base, precise spindle
elevation gauge, ratcheting fence locks
with independent left and right micro-adjustment,
precision ground cast iron table, fully adjustable
cutter guard, easy-to-change 2-speed belt drive,
and convenient pedestal controls.
2-1/2 HP, 220V, 9.5A, single-phase motor; Large precision
ground cast iron table; Table size: 28" x 30"; Spindles: 1/2" &
3/4"(Included); Router bit collets: 1/4" & 1/2" (Included); Spindle
travel: 3"; Spindle speeds: 7,000 & 10,000 RPM; Spindle
openings: 3", 3-1/2" & 6-3/4"; Magnetic switch w / thermal overload
protector; Shielded & lubricated ball bearings; Powder coated paint; . Built-in 4"
dust port; Approximate shipping weight: 390 lbs.
ITEM # D3574 - Resaw Fence Attachment
ITEM # D3124 - Extension Table (23" x 40")
ITEM # D3080 - Router Bit Spindle (Fits 1/4" & 1/2" Bits)