User Manual

Table Of Contents

Exclusion Zone Flag Placement:

1. Similar to fence boundary flag placement, place white flags in the

ground, six feet apart from one another to establish the desired

Exclusion Zone boundary. The blue flag is not required for Exclusion

Zone setup. (See Illustration D)

2. Using the Controller, select “Ex.Zones” from the main menu.

(See Figure 3.4)

3. Select “Add Ex.Zone” (See Figure 3.5)

4. Once you have confirmed that all flags are in the proper position,

press the “Complete” Button. (See Figure 3.6)

NOTE : These flags will represent the location of your wireless

Exclusion Zone and will be used later to train you dog. Be sure

that the flags form an enclosed zone.

Make sure that there are at least12 feet between different

Exclusion Zones and between Exclusion Zones and the fence

boundary. (If more flags are needed than were provided, they

can be purchased online at www.havahartwireless.com.)

Figure 3.4

Figure 3.5

Figure 3.6

Illustration D

Installing the Custom-Shape Wireless Dog Fence

Installing the Custom-Shape Wireless Dog Fence - Setting Up the Exclusion Zones

Havahart

Custom-Shape Wireless Dog Fence