User Manual

14
Figure 4.2
If successful, a positive auditory tone will sound and “Congratulations” will
appear, indicating that you’ve successfully set up an Exclusion Zone. (See
Figure 4.2)
You have the opportunity to name
the Exclusion Zone now if you desire.
Otherwise, the Exclusion Zone will be
given the default name of EXZONE1,
EXZONE2, etc. (See “Naming an
Exclusion Zone” on page 16 for more
information.)
2. Proceed in sequential order, holding the Controller over each
white flag and pressing the “Ex.Zone Flag Here” Button. Once you
have activated the last white flag, press the “Done” Button. (See
Figure 4.0)
3. If you are certain that you are finished activating perimeter points for
your Exclusion Zone, press the “Yes” Button. If you are not finished or
pressed the “Done” Button by accident, press the “Yes” Button
and you will be returned to the previous screen to continue
activating perimeter points. (See Figure 4.1)
4. Repeat this process to create additional Exclusion
Zones on your property.
Figure 3.7
Exclusion Zone Activation
1. Starting with the first white flag, hold the Controller at waist level
over the flag and press the “Ex.Zone Flag Here” Button. (See Figure 3.7)
Figure 3.9
Figure 3.8
Figure 4.0
Figure 4.1
Installing the Custom-Shape Wireless Dog Fence - Setting Up the Exclusion Zones
Havahart
®
Custom-Shape Wireless Dog Fence
If successful, a positive auditory tone will sound and “Ex.Zone Flag
Successfully Entered!” will appear briefly and then automatically go to the
next screen. (See Figure 3.8)
If unsuccessful, a negative auditory tone will sound and “Failure to Enter
Flag” will appear, directing you to repeat the process as the signal may not
have been properly recieved. (see Figure 3.9)