User's Manual

PAGE 11
TROUBLESHOOTING
Problem Solutions Illustration
Spray Away does not ‘see’
animals
Re-aim Spray Away
Clean infrared sensor with
damp cloth
On extremely hot days,
infrared sensor may not
detect animal’s heat. Please
refer to the chart on page 7
to determine the sensitivity
in warmer temperatures.
Spray Away is not
spraying, or is only lightly
spraying
If indicator light is
blinking continuously every
3 seconds, change batteries.
Water pressure from faucet
tap may be too low. Tighten
sprinkler head and hose
connection.
NEED NEW
DIAGRAM
Unit is activating when no
animal is present
Spray Away is sensing
movement. Reduce
sensitivity and re-test the
sensing area as explained in
the instructions on page 7.
Unit is leaking Check to be sure unit is free
from debris at hose
connection.
Ensure hose thread is not
damaged.
Make sure hose and
sprinkler are tightly
secured.
Hose pressure could be too
high if over 80 psi.