User's Manual

2. Install Batteries into Remote Control first, and then Unit Body
• Remote Control:
o Insert 2 AA batteries into remote control first.
o To test, press any button. Remote LED light should illuminate as the button is pressed. If
LED light does not illuminate, change your batteries.
(NEED DIAGRAM)
• Unit Body:
o Be sure the function knob is set to OFF
o Insert 4 AA batteries into battery case.
o If indicator light is blinking continuously every 3 seconds, batteries are low.
Note: Each time new batteries are installed, sensitivity is automatically set to a level of 5.
3. Check Spray Away Operation (Dry Test: Do NOT Attach Hose!)
• Turn function knob to ON, and point infrared sensor toward a wall, or something that does not
move.
• Wait 5 seconds, then wave hand in front of infrared sensor
• Spray Away will make a “click” or motor sound and indicator light will illuminate. Spray Away
will reset for 8 seconds between activation and will not detect motion.
Note: If you do not hear sound, try new batteries and try hooking your unit up to water. If the problem
persists, call us toll-free at 1.855.5.HAVAHART or live chat at www.havahart.com.
4. Assemble Step-in-Stake and Attach to Unit Body