User's Manual

175
4. Using the ▼/▲ Navigation Button, position the cursor next to MONITORING. Using the ◄/►
Navigation Button [oval 16] select YES to able to listen to other zones using the KP21 built-
in microphones and/or view activity in those zones if equipped with cameras, or NO if this
function is not required.
5. Using the ▼/▲ Navigation Button [oval 16], position the cursor next to WAKE-UP. Using the
◄/► Navigation Button [oval 16] select YES to able to be able to configure individual zones
or groups of zones to turn on at specific times and to specific sources, or NO if this function is
not required.
6. Using the ▼/▲ Navigation Button, position the cursor next to SLEEP. Using the ◄/►
Navigation Button [oval 16] select YES to able to be able to configure individual zones or
groups of zones to turn off at specific pre-programmed times or NO if this function is not
required.
7. Using the ▼/▲ Navigation Button [oval 16], position the cursor next to DOOR SETUP and
press the Set Button. Available doors will be identified by DOOR1: YES, DOOR2: YES, etc.
Using the ▼/▲ Navigation Button [oval 16] place the cursor next to: DOOR NUMBER CAM
and then using the ◄/► Navigation Button [oval 16] select the camera to be assigned to
that door.
8. When finished, either press the Exit Button [oval 17] on the remote to return to system
function or position the cursor next to BACK TO ZONE SETUP and press the
Set Button
[oval 18] to continue Zone Setup.
Figure 102 Assign Entertainment Services Screen
Assign Entertainment Services
This menu determines which common sources the remote zones will have access to. Typically all
sources would be allowed, (YES) but there may be some sources such as a specific DVD player
that is to only be selected and controlled by the Main Room. If a source has been blocked, (NO) a
message will appear on the KP21 Information Display SOURCE NOT AVAILABLE CHECK
SETTINGS.
The system default is all sources are permitted to the remote zones, so if you do not wish to block
any sources from the remote zones, you may skip this section and proceed to: NAME PAGING
GROUPS or press the Exit Button [oval 17] to exit Setup. To assign Entertainment Services by
source:
1. From ZONE SETUP PAGE 1, with the cursor next to ASSIGN ENTRTAINMENT SERVICES
press the Set Button [oval 18]. The ASSIGN ENTERTAINMENT SERVICES screen will
appear. (Figure 102)
2. Press the ▲/▼ Navigation Button [oval 16] to position the cursor next to a source that is to
be blocked from the remote zones.
3. Press the ◄/► Navigation Button [oval 16] to change that source’s status to NO. The
selected source will not be available to the remote zones.
4. Repeat steps 2-3 for any other sources to be blocked from the remote zones.
5. To continue Setup, position the cursor next to BACK TO ZONE SETUP and press the Set
Button [oval 18]. The ZONE SETUP PAGE 1 screen will appear.