User's Manual

8. Repeat steps 2-4 until all desired Cameras have been setup. Up to 7 Cameras can be

configured, matching the number of camera inputs on the AVH21’s.

To exit setup, press the Exit Button [oval 17]. To continue Zone Setup, position the cursor next

to BACK TO ZONE SETUP and press the Set Button [oval 18]. ZONE SETUP PAGE 1 will

appear.

Figure 108 Name Doors Screen

Name Doors

Naming doors populates the KP21 Keypad Door sub-menu with names of the door options for

Talk and Open. The system default will show two doors for each AVH21 on the network. A

system with one AVH21 will show Door 1 and Door 2 by default. A system with two AVH21’s will

also show Door 3 and Door 4 in the Door sub-menu. A system with three AVH21’s will include

Door 5 and Door 6. By naming the doors, they will appear as FRONT, REAR, GARAGE, etc to

make system operation easy without having to keep track of which door is where.

To name Doors:

1. From ZONE SETUP PAGE 1, with the cursor next to NAME DOORS, press the Set Button

[oval 18]. The NAME DOORS screen will appear. (Figure 108)

2. Press the ▼/▲ Navigation Button [oval 16] to position the cursor next to NAME. Press the

Set Button [oval 18]. A white rectangle will flash to the right of NAME: indicating that the

remote can be used to enter the letters for the camera name.

3. Using either the ▼/▲ Navigation Button [oval 16] or the Alphanumeric Buttons [oval 46],

enter the first letter for the group name. (i.e. FRONT). When the first letter appears on screen,

press the ► Navigation Button [oval 16] to move the cursor to the next letter position.

4. Repeat steps 2-3 above until the Door Name has been spelled out. A Door Name can have

up to 5 letters. Press the Set Button [oval 18]. This will store the name and return the cursor

to the arrow next to NAME.

5. To name additional groups, press the ▼/▲ Navigation Button [oval 16] to position the

cursor next to GROUP. Press the ◄/► Navigation Button [oval 16] to select another group.

6. Repeat steps 2-4 until all desired Doors have been named. Up to 2 Doors per AVH21, as

described above, can be named, matching the number of door latch relays on the AVH21’s.

To exit setup, press the Exit Button [oval 18]. To continue Zone Setup, position the cursor next

to BACK TO ZONE SETUP and press the Set Button [oval 18]. ZONE SETUP PAGE 1 will

appear. Press the ▼/▲ Navigation Button [oval 16] to position the cursor next to GO TO ZONE

PAGE 2. Press the Set Button [oval 18]. The ZONE SETUP PAGE 2 screen will appear. (Figure

109).

Press the ▼/▲ Navigation Button [oval 16] to position the cursor next to ZONE SETUP

BY NUMBER. Press the Set Button [oval 18]. The SETUP BY NUMBER PAGE 1 screen will

appear. (Figure 110)