User's Manual

186
Door Answer
This setting will determine whether the zone being configured will have the ability to talk to a
selected two-way door panel. When the DOOR button is pressed in the KP21 Keypad Main Menu,
a list of available Doors will appear. Selecting a given door then gives the option to TALK to the
door panel or OPEN the door lock with an associated AVH21 Door Relay. If Door Answer is
ENABLED in a zone, pressing & holding the Talk Button [oval 49, triangle 45, hexagon 6] will
allow the user to talk to the selected door panel. If Door Answer is disabled in a zone the
message: FEATURE DISABLED Check Settings will appear in the Information Display on the
keypad in the zone attempting to initiate the Talk function. Door Answer is also available from the
KP21R Remote using the Answer Button [triangle 45] to select a door and the Open Button
[triangle 44] to open a selected door.
To enable/disable Door Answer:
1. In the SETUP BY NUMBER PAGE 2 screen, press the ▼/▲ Navigation Button [oval 16] to
position the cursor next to DOOR ANSWER.
2. Using the ◄/► Navigation Button [oval 16], select the setting for the zone being
configured: ENABLED or DISABLED.
To exit setup, press the Exit Button [oval 17]. To continue Zone Setup, position the cursor next
to GO TO PAGE 3 and press the Set Button [oval 18]. SETUP BY NUMBER PAGE 3 will
appear. (Figure 112) To return to SETUP BY NUMBER PAGE 1, position the cursor next to GO
TO PAGE 1 and press the Set Button [oval 18].
Figure 112 Zone Setup By Number Page 3
Page 3
Keypad #
Not configurable.
Keypad Name
Not configurable in this screen.
Door Open
This setting will determine whether the zone being configured will have the ability to activate
remote door locks or not. When the Door Button [hexagon 18] is pressed in the KP21 Keypad
Main Menu, a list of available Doors will appear. Selecting a given door then gives the option to
TALK to the door panel or OPEN the door lock with an associated AVH21 Door Trigger Output
[pentagons 10, 11, 13, 14]. If Door Open is ENABLED in a zone, pressing the selected Door
Open Button [oval 48, triangle 44, hexagon 21] will activate the selected Door Trigger Output
[pentagons 10, 11, 13, 14] and release the remote door latch. If Door Open is Disabled in a zone
the message: FEATURE DISABLED Check Settings will appear in the Information Display on the
keypad in the zone attempting to initiate the Open function.
To enable/disable Door Open: