User's Manual

192
1. In the SLEEP SETUP 1-1 screen, press the ▼/▲ Navigation Button [oval 16] to position
the cursor next to SHUT DOWN.
2. Using the ◄/► Navigation Button [oval 16], set the length of time in minutes that the group
being configured is to stay on after the configured SLEEP TIME. Select INSTANT to
immediately turn the group off when the Sleep Time has been reached.
When
This setting will configure which day or days of the week the group being configured will Sleep.
Sleep can be set for daily, weekdays, weekends, custom, never or today. The custom setting
allows selecting the specific days of the week that a group is to Sleep.
To configure When:
1. In the SLEEP SETUP 1-1 screen, press the ▼/▲ Navigation Button [oval 16] to position
the cursor next to WHEN.
2. Using the ◄/► Navigation Button [oval 16], select the day(s) that the group being
configured is to Sleep: DAILY, WEEKDAYS, WEEKENDS, CUSTOM, NEVER OR TODAY.
3. To configure a custom schedule, with the cursor next to WHEN, press the ◄/► Navigation
Button [oval 16] until CUSTOM appears on screen. Press the Set Button [oval 18]. The
CUSTOM SLEEP TIME 1 screen will appear. (Figure 117)
Figure 117 Custom Sleep Time 1
4. With the cursor positioned next to MON, press the ◄/► Navigation Button [oval 16] to set
YES/NO. YES will have the group sleep on Mondays, NO will not have the group sleep on
Mondays. When MON has been configured, press the ▼/▲ Navigation Button [oval 16].
Press the ▼ Navigation Button [oval 16] to move to the next day. Press the ▲ Navigation
Button [oval 16] to move to the previous day.
5. Repeat step 4 until all days have been configured for the custom sleep setting. Press the Set
Button [oval 16] to store the custom setting.
6. Use the ▼/▲ Navigation Button [oval 16] to position the cursor next to GO TO SLEEP
PAGE 1-1. Press the Set Button [oval 18]. Continue Sleep Setup.
Source
This setting will determine which source the Sleep Group will switch to. LAST will have each zone
in the group switch to the last source selected in each of those zones. LOCAL will have each
zone in the group switch to the local source connected to the AUX-IN [hexagons 29, 30] on the
KP21 Keypad in each of those zones. Selecting one of the common sources, Disc 1, Disc 2, Disc
3, Radio 1, Radio 2, A/V/Aux, Video Recorder, Cable/Sat will have all zones in the group switch
to that source.
To set Source:
1. In the SLEEP SETUP 1-1 screen, press the ▼/▲ Navigation Button [oval 16] to position
the cursor next to SOURCE.