User's Manual

195
Figure 120 System Settings Page 1
Figure 121 System Settings Page 2
If a system only has one AVH21 A/V Hub, the Settings screens should appear as shown in
Figures 120 & 121. The values associated with AVH Hubs 2 & 3 will appear as shown in Figure
121, indicating no connection. If a second or third AVH21 is connected and the SETTINGS PAGE
2 screen does not populate with values indicating confirmation of connections and
communication, check connections between AVH21 Hubs and AVH power connections to find the
problem. If problem persists, see Section: Multiroom Troubleshooting Guide.
To view Settings:
1. In the Main Room, with the AVR21EN and video display ON, using the AVR21ENR1 remote,
press the AVR Button [oval 5].
2. Press the MENU Button [oval 44]. The MAIN MENU will appear.
3. Press the ▼/▲ Navigation Button [oval 16] to place the cursor next to DIAGNOSTICS.
Press the Set Button [oval 18]. The DIAGNOSTICS screen will appear.
4. With the cursor next to SETTINGS, press the Set Button. The SETTINGS PAGE 1 screen
will appear. (Figure 120)
5. To view Page 2, with the cursor positioned next to GOT TO SETTINGS PAGE 2, press the
Set Button [oval 18]. SETTINGS PAGE 2 will appear. (Figure 121)
6. To return to SETTINGS PAGE 1, with the cursor positioned next to GO TO SETTINGS
PAGE 1, press the Set Button [oval 18]. SETTINGS PAGE 1 will appear.
7. To return to DIAGNOSTICS, with the cursor positioned next to BACK TO DIAGNOSTICS,
press the Set Button [oval 18].
8. To return to system mode, press the Exit Button [oval 17].
Run System Test
This test will poll the multiroom network to find the KP21 keypads that are connected to the
AVH21 Hubs and ultimately to the AVR21EN and confirm network communication. All keypads 1-