User's Manual

20
Speaker, Channel, Digital Sel and Delay Mode parameters. For example, press Tone Mode.
TONE IN/OUT will appear on the lower display line [square 34]. Press one of the Mode
Adjust Buttons [squares 7, 9] to select
TONE IN . Press Tone Mode [square 30] again.
TREBLE MODE will appear in the lower display line. Press the Set Button [square 8]. The
numeric value for the treble adjustment will appear in the Lower Display Line [square 34].
Either adjust the value with one of the Mode Adjust Buttons [squares 7, 9] or press Set
[square 8] again.
TREBLE MODE will again appear on the lower display line [square 34].
Press Tone Mode [square 30] again and
BASS MODE will appear on the lower display line
[square 34]. Repeat the button press sequence to adjust Bass. This sequence of button
presses will allow you to change settings when using the Tone [square 30], Speaker
[square 29], Channel [square 28], Digital Sel [square 27] and Delay Mode [square 26]
Buttons.
9. Mode Adjust Up: Press to move down in menu options when used with the Tone [square
30], Speaker [square 29], Channel [square 28], Digital Sel [square 27] and Delay Mode
[square 26] Buttons. Within some selected Modes, press to adjust parameter values up.
10. Tuner Band Selector: Pressing this button once will switch the AVR to the Tuner mode.
Pressing it again will switch between the AM and FM frequency bands.
11. Preset Stations Selector: Press this button to scroll up or down through the list of stations
that have been entered into the preset memory. (See section: Main Room Operation/Tuner
Operation for more information on tuner programming.)
12. Optimizer Mic Input: 3.5mm mini jack for use with the included EzSet/EQ Microphone for
calibrating room EQ, and speaker output levels.
13. Optical Input 3 : Connect the optical digital output of an audio or video product to this jack.
Select Game/Cam as Source.
14. Optical Output 3: Connect this jack to the optical digital audio input of a compatible digital
recorder. Select a source with digital audio for signal.
15. Input Source Selector: Press this button to change the input by scrolling up or down through
the list of input sources.
16. Coaxial Input/Output 3: Connect the coaxial digital output of a digital audio product such as
a portable audio player or video game to this jack when switched as an input. Connect this
jack to the optical digital audio input of a compatible digital recorder when switched as an
output.
17. Coaxial Input 3 – Input/Output Status Indicator: This LED indicator will normally light
green to show that the front panel Coaxial 3 – Coaxial Input/Output Jack [square 16] is
operating as an input. When this jack is configured for use as an output, the LED will turn red
to show that the jack may be used as an output for recording. (See section: Main Room
Operation/Front Panel Connections for more information on configuring the front-panel
jacks as outputs, rather than inputs.)
18. Tuner Mode Selector: Press this button to select Auto or Manual tuning. When the button is
pressed so that
AUTO/STEREO appears in the Upper Display Line [square 33], the tuner
will search for the next station with an acceptable signal when the Tuning Selector [square
6] is pressed. When the button is pressed so that
MANUAL/MONO appears in the Upper
Display Line [square 33], each press of the Tuning Selector [square 6] will increase the
frequency one increment. This button may also be used to switch between Stereo and Mono
modes for FM radio reception. When weak reception is encountered, select the