User's Manual

http://www.woosim.com
26
ESC d n
[Name] Print and feed n lines
[Format] ASCII ESC d n
HEX 1B 64 n
Decimal 27 100 n
[Range] 0 ≤ n ≤ 255
[Description] Prints the data in the print buffer and feeds n lines.
[Note] 1) This command sets the print starting position to the beginning of the line.
2) This command does not affect the line spacing set by ESC 2 or ESC 3.
[Reference] ESC 2, ESC 3
FF
[Name] Print and return to standard mode in page mode.
[Format] ASCII FF
HEX 0C
Decimal 12
[Description] Prints the data in the print buffer collectively and returns to standard mode.
[Note] 1) The buffer data is deleted after being printed.
2) The Printing area set by ESC W is reset to the default setting.
3) This command sets the print position to the beginning of the line.
4) This command is enabled only in page mode.
[Reference] ESC FF, ESC L, ESC S
ESC FF
[Name] Print data in page mode.
[Format] ASCII ESC FF
HEX 1B 0C
Decimal 27 12
[Description] In page mode, prints all buffered data in the printing area collectively.
[Note] This commands is enabled only in page mode.
After printing the printer does not clear the buffered data, setting values for ESC T
and ESC W, and the position for buffering.
[Reference] FF, ESC L, ESC S