User's Manual

http://www.woosim.com

ESC SP n

[Name] Set right-side character spacing.

[Format] ASCII ESC SP n

HEX 1B 20 n

Decimal 27 32 n

[Range] 0 ≤ n ≤ 255

[Description] Sets the character spacing for the right side of the character to [n x horizontal or

vertical motion units] inches.

[Note] 1) The right side character spacing for double-width mode is twice the normal

value. When characters are enlarged, the right side character spacing is n times

normal value.

2) This command sets values independently in each mode.

3) The horizontal and vertical motion unit are specified by GS P. Changing the

horizontal or vertical motion unit does not affect the current right-side spacing.

4) The maximum right side spacing if 255/180 inches, Any setting exceeding

the maximum is converted to the maximum automatically.

[Default] n = 0

[Reference] GS P

ESC R n

[Name] Select an international character set.

[Format] ASCII ESC R n

HEX 1B 52 n

Decimal 27 82 n

[Range] 0 ≤ n ≤ 10

[Description] Selects an international character set n from the following table.