User's Manual

http://www.woosim.com

GS L nL nH

[Name] Set left margin.

[Format] ASCII GS L nL nH

HEX 1D 4C nL nH

Decimal 29 76 nL nH

[Range] 0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255

[Description] Set the left margin using nL and nH.

[Notes]1) The left margin is set to [(nL+nHx256)] x (horizontal motion unit) inches.

2) This command is effective only processed at the beginning of the line in standard

mode.

3) If this command is input in page mode, the printer performs only internal flag

operations.

4) This command does not affect printing in page mode.

5) If the setting exceeds the printable area, the maximum value of the printable area is

used.

6) The horizontal and vertical motion units are specified by GS P.

Changing the horizontal and vertical motion unit does not affect the current left

margin.

7) The horizontal motion unit (x) is used for calculating the left margin.

The calculated result is truncated to the minimum value of the mechanical pitch.

[Default] nL = 0, nH = 0

[Reference] GS P, GS W