User's Manual

http://www.woosim.com

When the print starting position is set to the upper right or lower

left of the printing

area ESC T (data is buffered in the paper feed direction);

Command using x : ESC 3, ESC J, ESC W, GS $, GS \

Command using y : ESC SP, ESC $, ESC W, ESC \

4) The command does not affect the previously specified values.

5) The calculated result from combining this command with others is truncated to

the minimum value of the mechanical pitch.

[Default] x = 180, y = 360

[Reference] ESC SP, ESC $, ESC 3, ESC J, ESC W, ESC \, GS $, GS L, GS W, GS \

ESC @

[Name] Initialize printer.

[Format] ASCII ESC @

HEX 1B 40

Decimal 27 64

[Description] Clears the data in the print buffer and resets the printer mode to the mode that was n

effect when the power was turned on.

[Notes] 1) The data in the receive buffer is not cleared.

2) The macro definition is not cleared.

ESC L

[Name] Select page mode

[Format] ASCII ESC L

HEX 1B 4C

Decimal 27 76

[Description] Switches from standard mode to page mode.

[Notes] 1) This command is enabled only when processed at the beginning of a line in

standard mode.

2) This command has no effect in page mode.

3) After printing by FF is completed or by using ESC S, the printer returns to

standard mode.