User's Manual

http://www.woosim.com
63
4) This command sets the position where data is buffered to the position specified
by ESC T within the printing area defined by ESC W.
5) This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) to those for page
mode;
Set right-side character spacing : ESC SP
Select default line spacing : ESC 2, ESC 3
6) Only valve settings is possible for the following commands in page mode; these
commands are not executed.
Select justification : ESC a
Turn upside-down printing mode on/off : ESC {
Set left margin : GS L
Set printable area width : GS W
7) The printer returns to standard mode when power is turned on, the printer is
reset, or ESC @ is used.
[Reference] FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \
ESC S
[Name] Select standard mode
[Format] ASCII ESC S
HEX 1B 53
Decimal 27 83
[Description] Switches from page mode to standard mode.
[Note] 1) This command is effective only in page mode.
2) Data buffered in page mode are cleared.
3) This command sets the print position to the beginning of the line.
4) The printing area set by ESC W are initialized.
5) This command switches the settings for the following commands (in which the
values can be set independently in standard mode and page mode) t
o those
for standard mode;