User's Manual

http://www.woosim.com

Set right-side character spacing : ESC SP

Select default line spacing : ESC 2, ESC 3

6) The following commands are enabled only to set in standard mode.

Set printing area in page mode : ESC W

Select print direction in page mode : ESC T

7) The following commands are ignored in standard mode.

Set absolute vertical print position in page mode : GS $

Set relative vertical print position in page mode : GS \

8) Standard mode is selected automatically when power is turned on,

the printer is reset, or command ESC @ is used.

[Reference] FF, ESC FF, ESC L